A Phoenix Mecano Brand Lifting column

The D-series lifting column with dual hall sensors is the optimal choice for light industrial and furniture applications. Available in two variants: D12, compatible with RK Rose+Krieger's profile system, and the more compact D23 model. With various stroke lengths, the D-series is engineered to meet your specific needs. Short lead times 9 Very robust Long lifetime Cable out large tube Dual hall sensors Limit switches Standard or contour plates Cable exit long/short side on large tube Cable exit small tube on D12 * See diagrams on page 3 ** Only applied when connected by short circuit

Technical drawings Standard plates D12

Recommended control units Compact-3 Maximum-efficiency SMPS 230VAC (EU) or 120VAC (US) versions 24V - 33V output 3 motor exits (max 5-8A/motor exit) Cascading: connect up to 4 Compact-3 Control two motor groups separately with the same control unit Cost-effective SMPS 230VAC (EU) 24V-33V output 2 motor exits (max 5A/motor exit) Cascading: connect up to 2 SMARTneo Control two motor groups separately with the same control unit

Actuator □ S - Single Lead screw Type Profile □ D - D-Series Series Motor type □ C - Gammadrive 35:1 C □ D - Gammadrive 34:2 D-Series Profile

Before use of products, see general terms & conditions and operating manuals. Lifetime and suitability are depending on application and must therefore be tested by each user. Specifications subject to change without prior notice. All components in this datasheet are property of Phoenix Mecano AB and may therefore not be used without permission. Copyright © Phoenix Mecano AB 2024.01 | Made in Sweden A Phoenix Mecano Brand