TCD Handheld Current Intelligent Screw Driver Model

Product catalog summary

Product Overview:
The document provides a detailed description of various models of screwdrivers, specifically focusing on the PTC DSH series and OPT SCS series. It outlines the specifications, features, and configurations available for these products.

Specifications:

Output Head Type: Options include Hex (H), HM crescent, and S types.
Motor Type: Available in AC and DC variants.
Nozzle Type: Straight type is specified.
Installation Mode: Options include Handheld (H) and Power Tool (PT).
Torque Form: Current (C) and Torque Sensor (T) options are available.
Maximum Torque: Ranges from 0.5 Nm to 20 Nm depending on the model.
Grip Diameter: Options include 30mm and 40mm.
Product Generation: Basic (B), Premium (P), and Supreme (S) versions are available.
Starting Mode: Pushed (P) and Pressed (D) options.

Key Features:

Ergonomic design with forward/reverse toggle switch.
Built-in buzzer and hook interface for ease of use.
Threaded airborne/clasped handheld bit quick connector.
Computer/PLC integration for parameter setting and data sharing.

Controller Specifications:

Models include CS and CK controllers with standard and high options.
Power options include 500W with voltage at 220V AC.
Accuracy is specified at ±0.5% with angle display minimum unit at 0.1°.
Communication forms include TCP/IP, Modbus TCP, and IO.
Data storage capabilities include multiple job and tightening result sets.

Additional Information:

Models are equipped with a trigger and cable connector for operational efficiency.
Support for MES data sharing and system integration investment reduction.
Torque, speed, angle control, and self-learning strategies are available for enhanced performance.

Catalog excerpts

TCD Handheld Current Intelligent Screw Driver Model-1

Screw driver product model description PT:Power Tool Screw driver Parameters Installation mode Nozzle type S:Straight type Motor type Maximum torque N-Nm;M-mNm 1000M:0.1Nm Grip diameter Starting mode Stretch length of Spring 000:no scaling Product Generation Model torque speed diameter MM 21 Screwdriver Controller Model TCD Handheld Current Intelligent Screw Driver PT:Power Tool Controller Name: CS:CS Controller-Standard CK:CK controller-High Controller platform: 001: Basic platform 003:3.5" basic platform 007:7" basic platform Screwdriver platform: CD series AC series TD series TC series

Open the catalog to page 1