Product Overview

The document describes an integrated tightening module designed for semi-automatic or manual stations, suitable for various product working conditions. It features a compact structure with a simple gas-electricity layout, facilitating easy installation and fixation with a force arm.

Key Specifications

• Product Sizes: L30/50mm, H60/H100/H150mm
• Torque Range: 0.3 to 15 Nm
• Weight (excluding screwdrivers and cables): Ranges from 1.4 to 3.9 kg depending on model
• Stroke of Vacuum Tube: Various lengths depending on module type

Product Features and Advantages

• Active bit stop for faster and more secure screw holding.
• Active screw suction tube stop enhances durability of wearable parts.
• Adjustable tightening pressure via pneumatic control minimizes reaction force.
• Convenient nozzle replacement with disassemblable nozzle sleeve parts.
• Automatic screw blowing eliminates the need for manual screw removal.
• Stable suction screw tightening to avoid interference.
• Integration with Intelligent Screw Driver and force arm enables control over tightening quantity, sequence, and quality during production.
• Structural integration improves usability, stability, and production efficiency.

Product Model Description

The model naming convention includes:

• Product Category: TMI (Integrated Module)
• Screw Type: S (Screw), H (Hexagon Head)
• Module Type: CH (Blow Screw - Handheld), BH (Vacuum - Handheld)
• Nozzle Type: NM (Normal), ST (Swivel Tube), or no nozzle
• Propulsion Series: Vacuum and handheld screw blowing (optional without tooling guide sleeve)
• Stroke of Bit: Blow Screw (Bxx - Common Screw), Vacuum (Bxx - External Thread Screw)
• Torque Range and Vacuum Tube Stroke: Specified by codes such as Kxx, Hxx, Lxx
• Cap Diameter Range: Various diameters indicated by Dxx

Structural and Maintenance Features

• Quick-change nozzle with simple structure for easy disassembly and maintenance.
• Swivel arm and screw blowing tube designed for quick disassembly.
• Nozzle, vacuum tube, and bit can be disassembled and assembled without tools, improving maintenance efficiency.
• Feeding pipe joint also tool-free for quick installation, debugging, and removal of channel staple failures.
• Lighter and more compact design enhances usability.

Component Details

• Nozzle mounting seat
• Trigger
• Screwdriver connector designed to fit screwdriver installation
• Screwdriver
• Cylinder barrel
• Air path
• Screw blowing tube equipped with ring sensor
• Nozzle

Additional Notes

• Drawings provided are for reference only; detailed specifications require direct contact.
• Screws with rubber washers or soft rubber are not compatible with this module.