Product Structure and Components

The document describes a vacuum module system primarily used for screw tightening applications. Key components include the nozzle, screw blowing tube, vacuum tube, upper and lower split vacuum base plates, screw driver and its mounting base, linear guide, base plate, tighten cylinder, ring sensor, bit spring, sliding block, cylinder mounting base, and vacuum cylinder. The hexagon head vacuum module integrates the bit and vacuum tube into a single structure.

Product Model and Configuration

The product model naming convention includes identifiers for the product category (TM for Tightening Module), screw type (S for Screw, H for Hexagon head), module type (NV for Vacuum), and nozzle type (NM for Normal, ST for Swivel Tube). The configuration also specifies the match level (H for High match).

Specifications and Parameters

The document provides reference values for various parameters such as cap diameter ranges (D7, D11, D15, D20, D27), stroke lengths for vacuum tubes and bits, and propulsion series (P2 indicating level two propulsion). It notes that actual test results should prevail over reference values and advises contacting the company for torque values of ��� and ��� Nm.

Nozzle Types and Performance

• Normal, Swivel Arm, and Swivel Mouthpiece nozzle types are detailed with their respective weight ranges (excluding screw drivers and cables) and cycle times (CT) in seconds per piece.
• Two module versions are available: Lightweight (12Nm torque) and Regular (35Nm torque).

Screw and Cap Compatibility

The modules support various screw ranges, including standard and combination hexagon head screws. The document specifies maximum cap diameters and sleeve diameters, with detailed limits on length-to-diameter (L/D) ratios and screw diameters (S). It also mentions that screws can be blown without limitation in some configurations.

Mechanical Dimensions and Mounting

Dimensions for lightweight and regular versions are provided, including lengths (e.g., 218.5 mm for lightweight, 796.5 mm for regular), widths, and mounting hole specifications (e.g., 6-Mx 3.5, 4-M5 THRU). The mounting block is adjustable to allow selective thread installation. Drawings are referenced as indicative and detailed specifications require direct contact with the company.

Critical Notes and Recommendations

• Reference values are indicative; actual performance should be verified through testing.
• For torque values exceeding standard ranges or for detailed specifications, users should contact the manufacturer.
• The maximum hexagon head size supported is M��; exceeding this requires consultation.
• The product system supports universal module series with propulsion and nozzle variations to suit different application needs.