Product Structure and Description

The product is a hexagon head vacuum module where the bit and vacuum tube are integrated into a single structure. The product model is designated as TMH L, with configurations indicating high match (H) and categorized under tightening (TM). The module type is SPV, designed for screw types including hexagon head screws (S and H). The vacuum module includes options for nozzle types such as none or clamp nozzle (CM).

Product Configuration and Parameters

The product features various parameters including cap diameter ranges (D7, D11, D15, D20, D27), stroke lengths for vacuum tubes (H1, H2, H3), nose piece lengths (L1, B1), and bit stroke (B1). Propulsion series are categorized into level one (P1) and level two (P2) propulsion. The universal module series includes components such as vacuum tube, screwdriver mounting base, screwdriver, limiting stop, linear guide, base plate, tighten cylinder, bit, vacuum base plate, and sliding block mounting seat.

Torque and Screw Compatibility

The hexagon head pick-up module selection depends on the opposite side dimension (S). The D11/D15 gear and D20 have overlapping opposite side dimensions but differ by torque range. Torque ranges for D11/D15 are approximately 3-12 Nm, while D20 gears cover 10-35 Nm. The module supports hexagon head screws with various cap diameters and opposite side dimensions, suitable for screws ranging from M2 to M10 depending on the model.

Product Size and Weight

Reference dimensions include lengths such as 40 mm, 105.2 mm, 72 mm, and weights excluding screwdrivers and cables. The tightening cycle time (CT) ranges approximately from 0.6 to 1.2 seconds per piece depending on the version. Two versions are available: lightweight (up to 12 Nm torque) and regular (up to 35 Nm torque). Mounting blocks are adjustable with selectable thread installation options.

Installation and Mounting Details

The module includes mounting holes such as 6-M3.5 and 4-M5 THRU, with precise tolerances (e.g., 100±0.025 mm). Nozzle types and screw ranges are specified for compatibility with different screw sizes and cap diameters. The product drawings provided are for reference only, and actual specifications should be confirmed with the manufacturer.

Notes and Recommendations

• All values provided are reference values; actual test results prevail.
• For torque ranges beyond 12 Nm and 35 Nm, customers should contact the company for customized solutions.
• Detailed specifications and drawings are available upon request.