Electric Tightening Module AUTOMATIC STATION Whole process monitoring Combined with intelligent screw driver, real-time monitoring of abnormal tightening conditions such as floating screws, sliding teeth, missing and so on can avoid the outflow of defective products. High precision control Applicable type of nozzle Self-tapping screw Compatible with various heights, saving electric cylinder and Z-direction moving mechanism Blow Screw Vacuum Pick Vacuum High efficiency tightening Accurate control of downforce: no impact during tightening to avoid screw thread damage; Flexible control of avoidance height: the screw suction tube can stop at any position within the travel range, with a wide range of compatibility. Servo electric drive control, compared with the traditional module, the screw feeding speed is increased by ��%. Contact with mechanical teeth Low torque micro pressure low speed Access hole Low pressure high speed Enter the mechanical teeth Low torque low pressure high speed Seating surface High Torque Medium Pressure High Speed Green and energy saving The pneumatic components are reduced, the air consumption is reduced by��%, and the Vacuum module only needs the vacuum air and brake air provided by the customer, which contributes to the energy saving and emission reduction of the factory. Product structure Sheet metal products have no support structure at the bottom PLC is used for information interaction to realize all-factor interactive control and real-time monitoring (speed,displacement, torque, pressure and time)； Applicable Conditions and Products Below M4 Aluminum-copper mechanical tooth Electric Tightening Module Product advantages Servo drive Screw driver controller 6-∅6.6 THRU ∅11 6.8 Reverse side Highly integrated module Screw Driver Screw Blowing Tube Equipped with ring sensor Electric Tightening Module Nozzle Guide sleeve at the front end,which is required to be equipped with guide sleeve according to the working condition of Vacuum * For detailed specifications, please contact us. The attached drawings are for reference only. Product model description Speed, displacement, downforce control 159.7 Torque and angle control Product category TME: Electric Tightening Module Module type BS:Blow Screw NV:Vacuum PV:Pick Vacuum Screw type S:Screw H:Hexagon head Propulsion series PV:Stepless propulsion Nozzle type NM:Normal ST:Swivel Tube ��:No nozzle Nose piece length L��/L��:Blow Screw L��:Vacuum Stroke of vacuum tube K��:Blow Screw H��/H���/H���: Stroke of vacuum tube