!£ BWSENSING BWM427 Cost-effective Dual-Axis Digital Output with Modbus Inclinometer Technical Manual

Cost-effective Dual-Axis Digital Output with Modbus Inclinometer Introduction Designed by Bewis Sensing Technology LLC, BWM427 is cost-effective dual-axis digital output with Modbus inclinometer with MEMS technology. It has a measuring range of ± 88° and a full-scale accuracy of 0.01° and a operating temperature of -40℃~+85℃. The product has automatic compensation and filtering algorithms to reduce errors caused by environmental changes. It measures the change of static gravitational field and converts it into angle change. The change directly outputs the horizontal angle value through digital...

BWM 427 Cost-effective Dual-Axis Digital Output with Modbus Inclinometer Resolution: The measured minimum change value that the sensor can detect and resolve within the measurement range. Accuracy: The error between the actual angle and the Root mean square(RMS) of the measured angle of the sensor (>16 times). Bewis Sensing Technology

BWM 427 Cost-effective Dual-Axis Digital Output with Modbus Inclinometer Bewis Sensing Technology LLCl

BWM 427 Cost-effective Dual-Axis Digital Output with Modbus Inclinometer The correct installation method can avoid measurement error. The following points should be made when installing the sensor: First of all, to ensure that the sensor mounting surface and the measured surface completely close, the measured surface should be as horizontal as possible, can not have the angle shown in Figure A and Figure C, the correct installation is shown in Figure B and Figure D. uneven surface generates the ang|e _ .-WWW T 7777777777777777777777777777777777777777/77777777777, the measured surface Secondly,...

BWM 427 Cost-effective Dual-Axis Digital Output with Modbus Inclinometer Electrical interfaces ■•^RED VCC ^YELLOW TXD ■•^GREEN RXD Bewis Sensing Technology LLCl

Cost-effective Dual-Axis Digital Output with Modbus Inclinometer Debug software Users can directly download serial assistant on official website (Supports-Download). You can also use more convenient and intuitive PC software. BWM427 supporting serial debugging software can be connected to the inclinometer on the computer for angle display. The software debugging interface is as shown in the figure below. Using the debug software, it can conveniently display the current X-direction tilt angle, and you can also modify and set other parameters by yourself. Software use steps: ① Correctly connect...

Protocol 1 Data Frame Format: (8 data bits, 1 stop bit, non verification, default rate 9600) Note: The data field is a hexadecimal number (PLC or configuration software reads the data directly with a 16-bit register is decimal). After converting to decimal, the real data = (data field -10000)/100. If the data field is 3D52, it is converted to decimal 15698, real data = (15698-10000)/100 = 56.98 degrees; the data field is 1230, converted into decimal 4656, real data = (4656-20000)/100 = -53.44 degree. Bewis Sensing Technology LLCl

BWM 427 Cost-effective Dual-Axis Digital Output with Modbus Inclinometer Bewis Sensing Technology

BWM 427 Cost-effective Dual-Axis Digital Output with Modbus Inclinometer Bewis Sensing Technology LLCl

BWM 427 Cost-effective Dual-Axis Digital Output with Modbus Inclinometer Note: If Save setting command is not executed, all setting will be invalid after power off.

Cost-effective Dual-Axis Digital Output with Modbus Inclinometer Executive standard ● Enterprise Quality System Standard: ISO9001:2008 Standard (Certificate No.10114Q16846ROS) ● CE certification (certificate number: 3854210814) ● RoHS (certificate number: G190930099) Bewis Sensing Technology LLC

BWM427 Cost-effective Dual-Axis Digital Output with Modbus Inclinometer Wuxi Bewis Sensing Technology LLC Address: Building 30, No. 58 Xiuxi Road, Binhu District, Wuxi City, Jiangsu Province, China Tel/Whatsapp: +86 189 2129 2620 Email: [email protected] Website: www.bwsensing.com