BWM418 Cost-effective Single-Axis Current Output Inclinometer Technical Manual

Cost-effective Single-Axis Current Output Inclinometer Introduction Designed by Bewis Sensing Technology LLC, BWM418 is a cost-effective single-axis current output inclinometer with MEMS technology and. It has a measuring range of ± 180° and a full-scale accuracy of 0.01° and a operating temperature of -40℃~+85℃. The product has automatic compensation and filtering algorithms to reduce errors caused by environmental changes. It measures the change of static gravitational field and converts it into angle change. The change directly outputs the horizontal angle value through current mode. It has...

BWM 418 Cost-effective Single-Axis Current Output Inclinometer Parameters Conditions Min Typical Max Units Operating current Non-loaded 20 30 40 mA Measuring range(°) Measuring axis Accuracy(°) Zero temperature drift(°/°C) Zero current output(mA) Full-scale output current range (mA) Average failure-free work compatibility Insulation resistance >100MQ Shock resistance 2000g,0.5ms,3times/axis Weight(g) 230 (package excluded) Resolution: The measured minimum change value that the sensor can detect and resolve within the measurement range. Accuracy: The error between the actual angle and the Root...

Cost-effective Single-Axis Current Output Inclinometer Mechanical Characteristic Connector Metal connector Protection level Shell material Magnesium alloy anodizing Package size Product Size: L90*W40.5*H26(mm) Bare plate product size Product size: L47*W36*H15(mm) Note: ±1mm error for length and width dimensions, please refer to actual size. Bewis Sensing Technology LLC

Cost-effective Single-Axis Current Output Inclinometer Installation direction The correct installation method can avoid measurement error. The following points should be made when installing the sensor: First of all, to ensure that the sensor mounting surface and the measured surface completely close, the measured surface should be as horizontal as possible, can not have the angle shown in Figure A and Figure C, the correct installation is shown in Figure B and Figure D. A B uneven surface generates the angle D uneven surface generates the angle Secondly, the bottom cable of the sensor and the...

GRAY Output Ground BWM 418 Cost-effective Single-Axis Current Output Inclinometer Cable color & Function Bewis SensinglTechnologylLLC

Cost-effective Single-Axis Current Output Inclinometer Debug software Users can directly download serial assistant on official website (Supports-Download). You can also use more convenient and intuitive PC software. BWM418 supporting serial debugging software can be connected to the inclinometer on the computer for angle display. The software debugging interface is as shown in the figure below. Using the debug software, it can conveniently display the current X-direction tilt angle, and you can also modify and set other parameters by yourself. Software use steps: ① Correctly connect the inclinometer...

BWM 418 Cost-effective Single-Axis Current Output Inclinometer IData Frame Format: (8 data bits,1 stop bit,No parity check,default baud rate 9600) Bewis SensinglTechnologylLLCp

BWM 418 Cost-effective Single-Axis Current Output Inclinometer Identifier Frame Length Address Code Command Data Checksum Command response: Identifier Frame Length Address Code Command Data Checksum (Ibyte) (1byte) (Ibyte) (Ibyte) (Ibyte) (Ibyte) Note: For data, 00: 2400, 01: 4800, 02: 9600, 03: 19200,04: 115200,Default 02:9600. Note: When the Set baud rate command is executed successfully, the command response will be return in the original baud rate and then communicate with new baud rate. Bewis SensinglTechnologylLLC

BWM 418 Cost-effective Single-Axis Current Output Inclinometer Identifier Frame Length Address Code (Ibyte) Obyte) (1byte) Command Data 0x00: question and answer Mode Data Rate Data Rate Data Rate Data Rate Data Rate Data Rate Note: The default output mode is 00(when setting 100HZ output frequency. Set baud rate to 115200 in high speed mode. Command response: Frame Length Address Code Command Data Note: 5Hz Data Rate means that 5 sets of angle data are automatically output every second, and so on. |dentifier Frame Length Address Code Command Data Checksum Command response: Identifier Frame Length...

Cost-effective Single-Axis Current Output Inclinometer Executive standard ● Enterprise Quality System Standard: ISO9001:2008 Standard (Certificate No.10114Q16846ROS) ● CE certification (certificate number: 3854210814) ● RoHS (certificate number: G190930099) Bewis Sensing Technology LLC

BWM418 Cost-effective Single-Axis Current Output Inclinometer Wuxi Bewis Sensing Technology LLC Address: Building 30, No. 58 Xiuxi Road, Binhu District, Wuxi City, Jiangsu Province, China Tel/Whatsapp: +86 189 2129 2620 Email: [email protected] Website: www.bwsensing.com