BWK227S Low Cost Dual-Axis Digital Output with Modbus Inclinometer Technical Manual

Low Cost Dual-Axis Digital Output with Modbus Inclinometer Introduction Designed by Bewis Sensing Technology LLC, BWK227S is a low cost dual-axis digital output with Modbus inclinometer, adopting the latest industrial level MEMS accelerometer. Its measuring range is ±90°, highest accuracy is 0.2°, working temperature is -40℃~+85℃, the product with a small size and low weight, can meet space-restricted application requirements. This product converts static gravity field changes into angle changes, It outputs horizontal angle values directly by digital, this product has the advantages of low cost,...

SpecificationsElectrical Specifications Parameters Resolution: The measured minimum change value that the sensor can detect and resolve within the measurement range. Accuracy: The error between the actual angle and the Root mean square(RMS) of the measured angle of the sensor (>16 times). Bewis SensinglTechnologylLLC

Mechanical Characteristic Connector Bare plate product size Product size: L33*W27*H6(mm) Note: ±1mm error for length and width dimensions, please refer to actual size. Bewis SensinglTechnologylLLC

Low Cost Dual-Axis Digital Output with Modbus Inclinometer Installation direction The correct installation method can avoid measurement error. The following points should be made when installing the sensor: First of all, to ensure that the sensor mounting surface and the measured surface completely close, the measured surface should be as horizontal as possible, can not have the angle shown in Figure A and Figure C, the correct installation is shown in Figure B and Figure D. A B uneven surface generates the angle D uneven surface generates the angle Secondly, the bottom cable of the sensor and...

Elect ri cal connections Electrical interfaces Bewis SensinglTechnologylLLCP

Low Cost Dual-Axis Digital Output with Modbus Inclinometer Debug software Users can directly download serial assistant on official website (Supports-Download). You can also use more convenient and intuitive PC software. BWK227S supporting serial debugging software can be connected to the inclinometer on the computer for angle display. The software debugging interface is as shown in the figure below. Using the debug software, it can conveniently display the current X-direction tilt angle, and you can also modify and set other parameters by yourself. Software use steps: ① Correctly connect the...

Protocol 1 Data Frame Format: (8 data bits, 1 stop bit, non verification, default rate 9600) Note: The data field is a hexadecimal number (PLC or configuration software reads the data directly with a 16-bit register is decimal). After converting to decimal, the real data = (data field -10000)/100. If the data field is 3D52, it is converted to decimal 15698, real data = (15698-10000)/100 = 56.98 degrees; the data field is 1230, converted into decimal 4656, real data = (4656-10000)/100 = -53.44 degree. Bewis SensinglTechnologylLLC

Bewis SensinglTechnologylLLC

Bewis SensinglTechnologylLLC

Note: The data field is the address module Bewis SensinglTechnologylLLC

Low Cost Dual-Axis Digital Output with Modbus Inclinometer Executive standard ● Enterprise Quality System Standard: ISO9001:2008 Standard (Certificate No.:10114Q16846ROS) ● CE certification (certificate number: 3854210814) ● RoHS (certificate number: G190930099) Bewis Sensing Technology LLC

BWK227S Low Cost Dual-Axis Digital Output with Modbus Inclinometer Wuxi Bewis Sensing Technology LLC Address: Building 30, No. 58 Xiuxi Road, Binhu District, Wuxi City, Jiangsu Province, China Tel/Whatsapp: +86 18921292620 Email: [email protected] Website: www.bwsensing.com