BWH517 High Precision Single-Axis Digital Output with Modbus Inclinometer Technical Manual

High Precision Single-Axis Digital Output with Modbus Inclinometer Introduction Designed by Bewis Sensing Technology LLC, BWH517 is a high precision single-axis digital output with Modbus inclinometer with MEMS technology. It has a measuring range of ± 30° and the highest accuracy of 0.003°. It is a cost-effective product. The product has automatic compensation and filtering algorithms to reduce errors caused by environmental changes. This product adopts the principle of non-contact measurement. It measures the change of static gravitational field and converts it into angle change. The change...

BWH517 High Precision Single-Axis Digital Output with Modbus Inclinometer Resolution: The measured minimum change value that the sensor can detect and resolve within the measurement range. Accuracy: The error between the actual angle and the Root mean square(RMS) of the measured angle of the sensor (>16 times). Bewis SensinglTechnologylLLC

BWH517 High Precision Single-Axis Digital Output with Modbus Inclinometer Package size Product Size:L103.8*W55.4*H26 (mm) Bare plate product size Product size: L68*W48*H12(mm) Note: ±1mm error for length and width dimensions, please refer to actual size. Bewis SensinglTechnologylLLC

High Precision Single-Axis Digital Output with Modbus Inclinometer Installation direction The correct installation method can avoid measurement error. The following points should be made when installing the sensor: First of all, to ensure that the sensor mounting surface and the measured surface completely close, the measured surface should be as horizontal as possible, can not have the angle shown in Figure A and Figure C, the correct installation is shown in Figure B and Figure D. B uneven surface generates the angle D uneven surface generates the angle Secondly, the bottom cable of the sensor...

BWH517 High Precision Single-Axis Digital Output with Modbus Inclinometer ■•^RED VCC ■•(YELLOW D+ ■•^GREEN D- Electrical interfaces RS 232 wiring diagram Bewis SensinglTechnologylLLCP

High Precision Single-Axis Digital Output with Modbus Inclinometer Debug software Users can directly download serial assistant on official website (Supports-Download). You can also use more convenient and intuitive PC software. BWH517 supporting serial debugging software can be connected to the inclinometer on the computer for angle display. The software debugging interface is as shown in the figure below. Using the debug software, it can conveniently display the current X-direction tilt angle, and you can also modify and set other parameters by yourself. Software use steps: ① Correctly connect...

BWH517 High Precision Single-Axis Digital Output with Modbus Inclinometer 1 Data Frame Format: (8 data bits, 1 stop bit, non verification, default rate 9600) Note: The data high and data low are expressed in hexadecimal, the actual angle = (data high -10000) + (data low -10000) x0.0001, such as 271E 4602, 271E is the data high, converted to decimal 10014, 10014-10000=14; 4602 is the lower level of the data, converted to decimal in 17922, (17922-10000) x0, 0001 = 0.7922, so the final angle is 14.7922. Bewis SensinglTechnologylLLC

BWH517 High Precision Single-Axis Digital Output with Modbus Inclinometer Note: XXXX indicates that the address range to be modified is 0000~00FF Bewis SensinglTechnologylLLC

Bewis SensinglTechnologylLLC

High Precision Single-Axis Digital Output with Modbus Inclinometer Executive standard ● Enterprise Quality System Standard: ISO9001:2008 Standard (Certificate No.:10114Q16846ROS) ● CE certification (certificate number: 3854210814) ● RoHS (certificate number: G190930099) Bewis Sensing Technology LLC

BWH517 High Precision Single-Axis Digital Output with Modbus Inclinometer Wuxi Bewis Sensing Technology LLC Address: Building 30, No. 58 Xiuxi Road, Binhu District, Wuxi City, Jiangsu Province, China Tel/Whatsapp: +86 189 2129 2620 Email: [email protected] Website: www.bwsensing.com