1. Catalogs
  2. Wuxi Bewis Sensing Tecnology LLC
  3. BW-VG 500C High-precision Digital Dynamic Inclinometer Technical Manual

BW-VG 500C High-precision Digital Dynamic Inclinometer Technical Manual
1 /9Pages

BW-VG 500C High-precision Digital  Dynamic Inclinometer  Technical Manual

BW-VG 500C High-precision Digital Dynamic Inclinometer Technical Manual
1 /9Pages

Catalog excerpts

BW-VG 500C High-precision Digital  Dynamic Inclinometer  Technical Manual-1

BW-VG 500C Series High-precision Digital Dynamic Inclinometer

 Open the catalog to page 1
BW-VG 500C High-precision Digital  Dynamic Inclinometer  Technical Manual-2

BW-VG500C High-precision Digital Dynamic Inclinometer The VG500C is a low-cost attitude measurement device that can measure the inertial attitude parameters of moving carrier's roll and pitch, angle velocity and acceleration. The attitude deviation is estimated by the 6-state Kalman filter with appropriate gain, which is suitable for inclination measurement in motion or vibration state. VG500C uses high-quality and reliable MEMS accelerometers and gyroscopes, and ensure measurement accuracy with algorithm. At the same time, the sealing design and strict process ensure that it can accurately measure...

 Open the catalog to page 2
BW-VG 500C High-precision Digital  Dynamic Inclinometer  Technical Manual-3

BW-VG500C High-precision Digital Dynamic Inclinometer Feature Electrical indicators Voltage Working current Performance Index Dynamic accuracy Static accuracy Tilt margin Attitude Parameter Dimension Physical properties Start delay Maximum sampling rate characteristics Weight (With packaging) Weight (with wire) frequency 2400 to115200 baud rate Digital output format Trouble-free work on Serial communication rate Binary high-performance Insulation Resistance Surge suppression Resolution:The measured minimum change value that the sensor can detect and resolve within the measurement range. Accuracy:...

 Open the catalog to page 3
BW-VG 500C High-precision Digital  Dynamic Inclinometer  Technical Manual-4

BW-VG500C High-precision Digital Dynamic Inclinometer Resolution Range Noise density Zero absolute error Bias stability Zero instability Mechanical Connector Protection level Shell material Magnesium aluminum alloy oxidation Package product size Product Size:L60*W59*H29(mm) PCB size PCB Size: L44*W35*H11mm, ±1mm error for length and width dimensions, please refer to actual size Bewis Sensing Technology LLC www.bwsensing.co

 Open the catalog to page 4
BW-VG 500C High-precision Digital  Dynamic Inclinometer  Technical Manual-5

BW-VG500C High-precision Digital Dynamic Inclinometer Installation The correct installation method can avoid measurement errors. When installing the sensor, please do the following: First of all, make sure that the sensor mounting surface is completely close to the measured surface, and the measured surface should be as level as possible. There should be no included angles as shown in Figure A and Figure C. The correct installation method is shown in Figure B and Figure D. Secondly, the bottom line of the sensor and the axis of the measured object cannot have an angle as shown in Figure E, and...

 Open the catalog to page 5
BW-VG 500C High-precision Digital  Dynamic Inclinometer  Technical Manual-6

BW-VG500C High-precision Digital Dynamic Inclinometer Electrical Interface Wiring definition RED Line Color Signal acquisition terminal RS 232 wiring diagram Axial definition: three-axis attitude, gyroscope, and acceleration data axis all conform to the right-hand principle Bewis Sensing Technology LLC www.bwsensing.com Tel:+86

 Open the catalog to page 6
BW-VG 500C High-precision Digital  Dynamic Inclinometer  Technical Manual-7

BW-VG500C High-precision Digital Dynamic Inclinometer Testing software You can download the serial debugging assistant directly on the official website (technical service -> download area), or you can use the more convenient and intuitive host computer software. The BW-VG500C supporting serial port debugging software can connect the inclination sensor on the computer to display the angle. The software debugging interface is shown in the figure below. Using the tilt angle to debug the host computer, you can easily display the current X and Y directions, and you can also modify and set other parameters....

 Open the catalog to page 7
BW-VG 500C High-precision Digital  Dynamic Inclinometer  Technical Manual-8

BW-VG500C High-precision Digital Dynamic Inclinometer Order Information Model Communication Mode Package Situation Executive standard ● Enterprise No.23919Q10455ROS) ● CE certification (certificate number: M.2019.103. U Y1151) ● ROHS (certificate Number: G 190930099) ● GB/T 191 SJ 20873-2003 General specification for inclinometer and level ● GBT 18459-2001 The calculation method of the main static performance index of the sensor ● JJF 1059.1-2012 Evaluation and expression of measurement uncertainty ● GBT 14412-2005 Mechanical vibration and shock Mechanical installation of accelerometer ● GJB...

 Open the catalog to page 8
BW-VG 500C High-precision Digital  Dynamic Inclinometer  Technical Manual-9

BW-VG500C Series High precision Digital Dynamic Inclinometer Wuxi Bewis Sensing Technology LLC Add: Building 30, NO. 58, Xiuxi Road, Binhu District, Wuxi City, Jiangsu Province, China Tel:+86 18921292620 Mail:[email protected] Web:www.bwsensin

 Open the catalog to page 9

All Wuxi Bewis Sensing Tecnology LLC catalogs and technical brochures

  1. BW-D63-B

    5  Pages

  2. BW-C50-B

    4  Pages

  3. BW-B80-B

    5  Pages

  4. GI320

    25  Pages

  5. AH100C

    9  Pages

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.