BW-IMU600 Series High Performance Inertial Measurement Unit

BW-IMU600 High Performance Inertial Measurement Unit Introduction BW-IMU600 is a high-precision micro-mechanical electromechanical inertial measurement unit produced by Bewis, a core chip developed and produced nationwide. It can output acceleration and angular velocity information without external signal input. It is suitable for motion, vibration or static, Inertial measurement under various conditions. BW-IMU600 uses highly reliable MEMS accelerometers and gyroscopes. The inertial data deviation is estimated by the 6-state Kalman filter with appropriate gain, and the measurement accuracy is...

BW-IMU600 High Performance Inertial Measurement Unit Specification Electrical Index Power Supply Operating current Operating temperature Performance Index Resolution Range Room temperature bias repeatability Bias stability at full temperature (GJB 10S) smooth Bias stability at full temperature (ALLAN) Scale factor nonlinearity Scale factor repeatability Room temperature bias stability (10S smooth) Zero offset repeatability (6 times) Full temperature bias stability Scale factor repeatability Room temperature bias stability (10s smooth) Gyro Maximum output Start delay Resolution: The smallest change...

BW-IMU600 High Performance Inertial Measurement Unit Mechanical Characteristic Connector Protection Level Shell material Magnesium alloy sanding oxidation Package Size Product size：L44.8 * W38.6 * H24.8（mm） Bewis Sensing Technology LLC www.bwsensing.com Tel：+86 189212

BW-IMU600 High Performance Inertial Measurement Unit Installation The correct installation method can avoid measurement errors. When installing the sensor, please do the following: First of all, make sure that the sensor mounting surface is completely close to the measured surface, and the measured surface should be as level as possible, and there should be no included angles as shown in Figure A and Figure C. The correct installation method is shown in Figure B and Figure D A B uneven surface generates the angle D uneven surface generates the angle Secondly, the bottom line of the sensor and...

BW-IMU600 High Performance Inertial Measurement Unit Connections Wiring definition Thread Axial definition Three-axis attitude, gyroscope, acceleration Data axis conforms to the right-hand rule. Bewis Sensing Technology LLC www.bwsensing.com Tel：

BW-IMU600 High Performance Inertial Measurement Unit Order Information Model Communication mode No.064-21-Q-3290-RO-S) ● CE certification (certificate number: M.2019.103. U Y1151) ● ROHS (certificate Number: G 190930099) ● GB/T 191 SJ 20873-2003 General specification for inclinometer and level ● GBT 18459-2001 The calculation method of the main static performance index of the sensor ● JJF 1059-1999 Evaluation and expression of measurement uncertainty ● GBT 14412-2005 Mechanical vibration and shock Mechanical installation of accelerometer ● GJB 450A-2004 General requirements for equipment reliability...

BW-IMU600 Series High Performance Inertial Measurement Unit Wuxi Bewis Sensing Technology LLC Add：Building 30, No.58 Xiuxi Road, Binhu District, Wuxi City, Jiangsu Province, China Tel：+86 18921292620 Email：[email protected] Web：www.bwsensin