1. Catalogs
  2. WUNTRONIC GmbH
  3. Heat Flux Transducer w.180° View Angle, Series CR

Heat Flux Transducer w.180° View Angle, Series CR

Heat Flux Transducer w.180° View Angle, Series CR

Product catalog summary
Description: The CR Series Heat Flux Transducer is designed for flush mounting to measure convective and radiant heat flux. It can also function as a free-standing radiometer. The device outputs an emf millivolt (mV) signal proportional to the thermal energy received, with an optional thermocouple for reference temperature measurement.
Specifications:
  • View Angle: 180 degrees, flat
  • Time Response: 2 seconds for 63% step change
  • Spectral Response: 0.92, flat, Gray Body
  • Pressure Sensitivity: Impervious
  • Leads: TFE covered, stranded, 1m (3ft)
  • Max Body Temperature: 140°C (300°F)
  • Optional Thermocouple: Type T or K, 1m (3ft) long
  • Housing Material: Anodized Aluminum
  • Calibration: NIST traceable constant provided
  • Max Heat Flux: 15 KW/m² (48000 BTU/ft²Hr)
Features:
  • 180 Degree View Angle
  • Direct Heat Flux Readout
  • Self-generating output, no amplifier or power supply needed
  • Optional Thermocouple Type T or K
  • Easy installation
Applications: Suitable for use in submarines, vessels, industry, material research, pipes, ducts, refineries, reactors, and aerospace.
Order Information: The document lists various models with different dimensions and thermocouple options, each with specific nominal sensitivity outputs. Standard cable length is 3 ft (1m), with additional lengths available.
See more

Catalog excerpts

Heat Flux Transducer w.180° View Angle, Series CR-1

http://www.wuntronic.de e-mail: [email protected] Mess-, Steuer- und Regelgeräte GmbH Heat Flux Transducer (HFT) with 180° View Angle For Convective and Radiant Heat Flux Measurement 180 Degree View Angle Optional with Thermocouple Type T or K Direct Heat Flux Readout Self-generating output - requires no Amplifier nor Power Supply or Reference Junction Description: This Type CR-Heat Flux Transducer is designed primary for \"flush mounting\" with surface under examination. Therefore, it lends itself for measurement of Heat Convention with or without the presence of Heat Radiation. But, the CR transducer may also be employed as a \"free standing\" Radiometer. Its emf millivolt (mV) output is directly proportional to the thermal energy entering its sensor surface. An optional body Thermocouple serves as reference temperature measurement means. Submarines and Vessels Industry Material Research Pipes and Ducts Refineries and Reactors Aero-Space Order number C01-400-320 CR-20-K Cable Options (Standard cable length is 3 ft / 1m) C01-401-100 3 ft. (1m) additional cable length Copyright© 2016 WUNTRONIC GmbH. All Rights Reserved

 Open the catalog to page 1

All WUNTRONIC GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.