Biaxial, range ±10g to ±70g, 400 Hz
2Pages

http://www.wuntronic.com e-mail: WUNTRONIC@wuntronic.com Mess-, Steuer- und Regelgeräte GmbH Rugged Unaxial and Biaxial Accelerometers for ±10g to ±70g Accelerometers with Superior Zero g Bias Stability Ranges ±70g , ±50g, ±40, ±35g, ±30g, ±25g, ±20g, ±15g, ±10g available. Model 13200C (Uniaxial) 23200C (Biaxial) Wide Bandwidth to 400 Hz Temperature sensor build-in Power Supply +8.5 VDC to +36VDC Small and Rugged only 35 gram Shock Survival ±4000g 3 Years Warranty Benefits and Advantages High Accuracy and Linearity over Wide Temperature Range: The voltage output for each axis of the is directly Description: The accelerometers 13200C and 23200C have either one or two orthogonal axes and a temperature sensor in a small, rugged package. The small size and built-in power regulation allow them to fit in most applications without any external circuitry or conditioning. Choose the bandwidth and range accelerometer options best suited for your application to measure ±10 g, ±15 g, ±20, 25g, ±30g, 35g, ±40, ±50g or ±70g accelerations on one or two axes. The high repeatability of the built-in temperature sensor allows precise compensation of temperature effects, and alignment data provided on the included calibration certificate can be used to compensate for transverse sensitivity and alignment errors. When extra precision is required, Option C002, enhanced temperature calibration is available. Unregulated +8.5 to +36V DC power is all that is required to power this sensor to measure accelerations on each of three axes. Each axial sensor has been tested over the -40 to +85°C temperature range and has has a nominal full scale output swing of ±2 volts. The zero g output level is nominally +2.5 volts and temperature compensated over the range of -40 to +85°C. Precise values for each axis are available on the included calibration certificate. Custom versions of the 13200C and 23200C can be provided for applications which require different range and/or bandwidth. proportional to the acceleration along that axis. Each DC-coupled output is fully scaled, referenced and temperature compensated over the entire -40 to +85°C temperature range. Our internal temperature compensation routine provides for unrivaled measurement accuracy over varying temperatures. Calibration Certificate: Each accelerometer 13201A and 23201A is supplied with a calibration certificate listing gain, offset, and on-axis and transverse alignment parameters needed to ensure rapid and efficient system implementation. Increased offset compensation can be obtained with Option C002, Enhanced Temperature Calibration Self-Test on Digital Command: A TTL-compatible self-test input causes a simulated acceleration to be injected into all three sensors to verify channel integrity. Small Size: Complete conditioned triaxial accelerometer in less than one cubic inch. Built-In Power Supply Regulation: Unregulated DC power from +8.5 to +36 volts is all that is required to measure accelerations on all axes. Reverse power voltages of up to -80 V can be withstood indefinitely. Transients of +80 V for 550 ms compatible with MIL-STD-704A can be withstood with full operation. Easy Installation: A built-in terminal block or cable with 9-pin connector simplifies wiring. Tapped holes on bottom and back simplify horizontal or vertical mounting. Suitable for Harsh Environments: The Accelerometers 13200C and 23200C are robust and can be used in harsh environments. The unit will survive 3500g powered and unpowered. 3 years Warranty: All accelerometers come with a three-year factory warranty. Copyright© 2009 WUNTRONIC GmbH. All Rights Reserved

Dimensions: Connections 3 mm x 0,5 mm Thread 3,5 mm [0.138] Deep (4) Places Spring and Cable added with Option Tnnn T004 Male D-Shell Connector A1+ Signal A2+ +5V Out Brown Red Orange Yellow A3+ T+ Self Test-L Green Blue Violet Order Informations: Rear View Dimensions in inches [mm] 6061-T6 aluminum case with blue anise finish. Two 3 mm x 0.5 mm threaded holes are provided on each of three orthogonal faces for mounting. Termination T000: PCB mount T004: 4 ft cable with DB9M Tnnn: Custom length, nnn ft. Calibration C001: Std. room temp cal only C002: C001 cal plus -40°C to +85°C enhanced...