Catalogs >
WUNTRONIC GmbH >
Axial Hallprobe with Analog Output KOSHAVA-AT

Axial Hallprobe with Analog Output KOSHAVA-AT
1 / 1Pages

Catalog excerpts

Axial Hallprobe with Analog Output KOSHAVA-AT - 1

Mess-, Steuer- und Regelgerate GmbH Hand Tesla Meter / Gauss Meter to connect with a Voltmeter Autonomous working measuring probe with analog output Model KOSHAVA-AT and KOSHAVA-AA Features: • Connection to digital multimeters or oscilloscopes • Inexpensive • DC Field measurement from 199,9mT to 1999mT • Continuous operating >10 hours • Rugged design • RoHS Compliant (lead-free) • 3 Years Warranty (excluding mechanical damage) • North and South Poles recognition by + or - output • Very easy to use Continuous operating >10 hours The independently operating Tesla Meter / Gauss Meter Type KO-SHAVA analog for connection to a digital multimeter, oscilloscope, data logger or data acquisition card is an inexpensive alternative to the handheld and USB Tesla meter / Gauss meters. The KOHSHAVA analog is powered by two button batteries. The measurement is started by pressing the start button. The measured value is output proportional to the measured value as an analog signal (1 mV corresponds to 1 mT). Since digital multimeter already are in most universities and technical schools anyway in large quantities for the training of students and pupils present, the Tesla Gauss KOSHAVA analog is an ideal and inexpensive way each student to give a magnetometer in hands. Technical Specifications: • Magnetometer for training of students • Analysis of magnetic circuits and components • Measure stray and leakage fields • Inexpensive solution for teaching in schools and universities • Testing, sorting, classifying magnets • Relay and solenoid test Environmental conditions: • NDT Compliance Testmg Copyright© 2017 WUNTRONIC GmbH. All Rights Reserved

Open the catalog to page 1