16 channel Data Logger with Display
3Pages

http://www.wuntronic.de e-mail: WUNTRONIC@wuntronic.de Mess-, Steuer- und Regelgeräte GmbH Universal Monitoring System / Datenlogger MS55 und MS55D The complete solution for monitoring of temperature, humidity and other values especially in following applications: Food and beverages industry (HACCP) Pharmaceutical industry (GMP) Blood stations, pharmacies Horticulture and cultivation of plants HVAC (heating, ventilation, air conditioning, cooling Building and energy management Building automation Sixteen channel dataloggers are designed for recording of values from transducers of variety of quantities, alarm state indication, and process control. Parameters of inputs Research and development are defined by the types of installed input modules. Datalogger with transducers conLaboratories (GLP). figured accordingly to client order can measure analog signals, frequency, count impulses, evaluate two-state quantities and read data from devices compatible with ADAM Advantech protocol is under preparation Data is ready to download to a personal computer anytime via USB, RS232, RS485, Ethernet, modem or GSM modem. Analyzing of the record is enabled after download to the PC by means of included program NEW FIRMWARE AND SOFTWARE ENABLE ESPECIALLY TO Configure individually each input channel for measurement, alarm evaluation and data logging, including individual logging interval for each input. Each input channel can be individually programmed for different modes of record (continuous record, time dependent re- cord, record only if specified logic conditions are matched, record triggered by external signal, etc.). It is enabled to record with shorter interval in case, measured values match previously defined conditions e.g. to map in detail trouble state. It is also enabled to memorize actual value and time if defined time event appears. Set up to four different logic conditions for each channel to activate alarm. Each condition compares measured values from inputs with set limits. It is possible to set hysteresis and delay of condition validity. Also weekly program can be set and distant condition from the PC. Indicate alarm states - visually, audibly, by relay contact, by e-mail or SMS message. Control processes by means of the optional relay module enabling to switch16output relays depending on alarm states. Receive information from data logger by means of SMS messages via GSM modem - actual values, alarms, memory occupation and other. Assign to each input channel name of actual recorded process to identify monitored object (e.g. type of monitored product). It is enabled to select thisnamefrom data logger keyboard during the operation. Store several configuration profiles (all logger parameters setting) for different measuring tasks and select profiles from MS5D logger keyboard or optional external terminal. Change easily input modules if different input signals are required for measurement. To connect input signals easily to removeable terminal connector Each input channel is equipped with three terminals including shielding Following data loggers are available: MS55D - completely equipped data logger - dual line alpha numeric LCD display - four control buttons -32alarm LED’s MS55 - all functions asMS5D data logger - without dual line alphanumeric LCD display - without control buttons - without32alarm LED’s -common alarm indication with Copyright© 2012 WUNTRONIC GmbH. All Rights Reserved

- ANALOG or GSM MODEM - SMS - E-MAIL, SNMP TRAP - PHONE DIALER - AUDIBLE SIGNAL PHONE DIALER ALARM OUTPUTS: - RELAY CONTACT - VOLTAGE SIGNAL GSM modem EXTERNAL DISPLAY & KEYBOARD OUTPUT RELAYS MODULE CONTROLLED CONTROLLED CONTROLLED interior temperature, humidity, pressure temperature, humidity, pressure probe OTHER MONITORED DEVICES temperature transducer temperature, humidity, pressure probe temperature transducer

DC-Strom-Module ohne galvanische Trennung W07-100-150 DC Strom Modul für Datenlogger MS2, MS3, MS4+, ohne galv. Trennung, mit gemeinsamer Masse, ausgelegt für passive Stromabtastung ohne galvanischer Trennung DC-Strom-Module mit galvanische Trennung W07-100-165 AC-Strom-Module mit galvanische Trennung W07-100-196 W07-100-206 W07-100-200 DC Strom 0 bis 20mA DC Strom 0 bis 1A DC Strom 0 bis 5A Widerstand (gewünschter Bereich muss angegeben werden) ohne galvanischer Trennung Widerstands-Module mit galvanische Trennung W07-100-305 Widerstand (gewünschter Bereich muss angegeben werden)...