Sheet Metal Tools and Machines for Cutting, Bending and Seaming
12Pages

Sheet Metal Tools and Machines for Cutting, Bending and Seaming WUKO Cutter WUKO Sheet Metal Shears WUKO Clipper WUKO Bogie Bender WUKO Uber Bender WUKO Disc-O-Bender Twist WUKO Disc-O-Bender WUKO Master WUKO Sprinter WUKO Seam Closer For further information and demonstration videos: www.wuko.at www.wukoinc.com

Top Quality that Pays for Itself! WUKO Rotary Sheet Metal Shears 1010 Tough everlasting shears for manual operation, produced since the 80s! • • • • Made of hard-wearing, non-corrosive materials Clamping device with neoprene spindles to hold material in place Adjustable cutting wheels made of hardened tool steel Available in four working widths: • 1.00 m (40 in); 57 kg (126 lbs) • 1.25 m (50 in); 63 kg (139 lbs) • 1.50 m (60 in); 69 kg (152 lbs) • 2.00 m (80 in); 85 kg (187 lbs) Accessories Meter counter Max. sheet metal thickness: Galvanized steel 1.00 mm (20 ga) Aluminum, Copper, Zinc...

The Best Cutting Tool Ever! WUKO Clipper 1020 The amazing little slitter – running through the sheet metal without vibrations and curls. • Roller assembly for cutting long (e.g. tapered) sheet metal panels laid out on the floor in an easy and quick way • Hardened tool steel cutting wheels make for precise and e ortless cutting: whether straight or curved, short or long metal sheets • For cutting according to scribe lines or with adjustable guide • Variable cutting speed • Ideal for both workshop and job site • Delivered in a carrying case WUKO Clipper 1020 C2A With cordless drive (18 V) WUKO...

The World’s Smallest “Bending Brakes” WUKO Mini Bender 0‒90° Our curve specialists! For bending up to 90° especially on small radii (inner as well as outer radii). WUKO Mini Bender 2020 Maximum bending height: 20 mm ( ⁄ WUKO Mini Bender 2050 Maximum bending height: 50 mm (2 in). Can be used to make the profile for the 1 inch double-lock standing seam. Equipped with centimeter or inch scale. WUKO Uni Bender 0‒90° For bending and forming in sheet metal fabrication. Suitable for both straight and curved sheets. Equipped with four roller stops enabling easier handling and better guidance...

Novelties Come from WUKO! WUKO Mini Uber Bender 0‒100° A smart, handy tool o ering a nice solution for bending on small radii. • Equipped with an angled bending wheel for bending up to 100° • Two roller stops and two support rollers • A compact Uber Bender WUKO Mini Uber Bender 6050 Bending height: 5–50 mm ( ⁄ –2 in) WUKO Uber Bender 0‒100° Equipped with an angled bending disc for bending up to 100° • Avoids potential scratches to the underlying surface • Demands less space when forming male and female profiles • O ers wider application than other tools The ideal tool for delicate materials,...

O ten Copied, Never Beaten! WUKO Mini Disc-O-Bender 4010 90‒180° Starts at 90° and bends up to 180°. Creates hem also on inner and outer radii. Requires free space at the side for setting on and o . The ideal supplement to the WUKO Mini Bender and WUKO Uni Bender. Bending height: WUKO Disc-O-Bender Twist 4040 / 90‒180° Maxi 4041 Starts at 90° and bends up to 180°. Creates hem also on inner and outer radii. • No need for free space at the side for setting the tool on and o : • Just twist the roller stop by means of the locking bolt • Place the tool on the right angle bend • Twist the roller...

The Best Choice for the Site – Let’s WUKO! WUKO Combo Bender 5000 Handy tool for beading, sti ening and o setting of sheet metal. • • • • • • Four roller stops for easier guidance on straight sheet metal strips Quick and easy adjustment of two roller stops for working on inside curves Adjustable throat depth from 0 to 65 mm (0 to 2 ½ in) Lower sha t radially adjustable (forming pressure increase) Roll sets made of durable steel and equipped with long-life bearings Interchangeable roll sets Available standard roll sets (ask for custom rolls!) Prepared for Any Job with WUKO Bender Sets WUKO...

The Much Di erent Roof Panel Machine WUKO Master 0420 Roof panel machine for making the profile for single and double-lock standing seams. Integrated panel curving (convex and concave) equipment! Seam height: 25 mm (1 in) Profiling • Coil width between 290 and 810 mm (11.5 and 32 in) continuously adjustable by handwheel over two spindles. Finished panel widths between 210 and 730 mm (8.5 and 28 in) • Inlet guides easily and precisely adjustable (measure correction on the profile) • Eight hardened roll forming stations for a clean profile, poor in tension • 8th forming station for aligning...

Tough Quality for Professionals WUKO Roof Profiling Machine 1008 Power tool creating the profile for single and double-lock standing seams on bent panels. • Adjustable for di erent edging heights • Also for separate profiling of both sides of the panel • Profiles straight from start of trays. Can also be used for small roof surfaces, slanting, angular and o -set elements. • Enables profiling in narrow places: minimum distance between seam centres (bay width) about 8 cm (3 ¼ in) • Also for mirror covering • Standard machine for domed roofs; down to a min. radius of 2 m (80 in). Even smaller...

Power Tools for Seaming WUKO Roof Seaming Machine 1006 Power tool for closing the single or double-lock standing seam. • Adjustable for di erent seam heights • Closes straight from start of panels. Can also be used for small roof surfaces, slanting, angular and o -set elements • Single or double-lock standing seam in one run • For curved roofs (convex, concave or ogee) • Small width of about 17 cm (6 ⁄ in) allows seaming of very narrow panels, e.g. tapered panels • Can be removed from the seam at any time • Incl. carrying case Min. seam height 25 mm (1 in) Max. sheet metal thickness:...