Catalogs >
Cubic Sensor and Instrument Co.,Ltd >
Electrochemical (ECD) FIXED H2S GAS

Electrochemical (ECD) FIXED H2S GAS
6Pages

Catalog excerpts

Electrochemical (ECD) FIXED H2S GAS TRANSMITTER Jun. 10th 2011 Wuhan Cubic Optoelectronics Co. , Ltd Add:Fenghuang No.3 Road, Fenghuang Industrial Park,Eastlake Hi-tech Development Zone, Wuhan 430205, China Tel: 86-27-81628831 Fax: 86-27-87405251 www.GasSensor.com.cn

Open the catalog to page 1

FEATURES  Proprietary infrared gas analysis technology, with high accuracy, high resolution, long life and easy maintenance;  High and low alarm settings, two levels of audio and light alarms;  Automatic zero calibration with air; Diffusion-type sampling methods;  Fast response and Immune from “poisoning”;  Real-time displaying gas concentration with LED;  Audible alarm device to prevent accidents and ensure the safety of life;  Metal case for industrial online monitor 1 – Power cord port 2 - Ground Hole 3 - Enclosure 4- Bolt hole 5 - Digital display 6 - Infrared receiver 7 -

Open the catalog to page 2

Measuring method

Open the catalog to page 3

ION ■Transmitter mounting height is decided by the measured gas weight ratio. If the measured gas is less than air, the transmitter is usually installed in the up place, 30cm from the ceiling; if the ceiling is high (higher than 5 meters), the proper installation height should be considered by the gas leakage speed; ■Transmitter installation place is determined by gas leakage source and working structure. 1) Firstly to check the area of working place and possible leakage points to determine required quantity of gas detector. In general, the detection probe radius of 7.5 m indoor; outside...

Open the catalog to page 5