- Catalogs
- WPT Power Corporation
- Power Grip High Speed Clutch
Power Grip High Speed Clutch
Power Grip High Speed Clutch
- Hydraulic Clutches: The clutches are available in various models, each with specific maximum input torque, speed, and lining area. For example, Model 111 has a maximum input torque of 650 lbf·ft (881 N·m) and a maximum speed of 2500 r/min.
- Drive Ring Dimensions: The document provides detailed dimensions for different ring types (A, B, C) and sizes, including measurements for hole circle diameter and the number of teeth.
- Consult WPT Application Engineering for application assistance and applicable service factors.
- Larger bore sizes may be accommodated upon consultation with WPT Application Engineering.
- Dynamic torque is 75% of static torque.
Catalog excerpts
Pneumatic Clutches <©»»»»»» Power Grip High Speed Clutches are designed to withstand severe applications mounted to internal combustion engines. The drive rings will fit standard SAE industrial flywheels. Heavy duty gear teeth friction discs are designed to withstand high shock loads. WPT’s Power Grip High Speed clutches are well suited for bell housing gear box clutch applications. Consult WPT Application Engineering for application assistance and applicable service factors. Larger bore sizes may be accommodated, consult WPT Application Engineering. Dynamic torque is 75% of static torque. *For Drive Ring Dimensions see chart. Pneumatic actuation at 100 PSI. Hydraulic actuation at 500 PSI.
Open the catalog to page 1
Spider Flange Dimensions Hole Circle Drive Ring Dimensions Size
Open the catalog to page 2All WPT Power Corporation catalogs and technical brochures
Low Inertia Clutch2 Pages
Mechanical Power Take-Off4 Pages
Steel Water Cooled Brake2 Pages
Caliper Disc Brake1 Page
Power Grip & Power PO Clutches16 Pages
Engine Driven Products24 Pages
Winches and Hoists24 Pages
WPT LowIInertia12 Pages
Caliper Brakes4 Pages
Water Cooled Brakes12 Pages
Low Inertia Clutches and Brakes12 Pages
