- Catalogs
- WPM Leipzig
- Universal Testing Machine UPC 2000
Universal Testing Machine UPC 2000
Universal Testing Machine UPC 2000
- Frame: Two-column single compartment construction with an infinitely variable crosshead.
- Nominal Force: 2000 kN for both tension and compression.
- Test Area: Clear width between columns is 850 mm, with a maximum distance of 1000 mm between gripping devices for tensile tests.
- Control Panel: Separate panel for gripping device operation and crosshead adjustment.
- Nominal force for tension and compression is 2000 kN.
- Nominal pressure is 280 bar with a stroke of 300 mm.
- Direct force measurement using strain gauge transducer with precision better than Class 1.
- Automatic safety shut-off at 5% over nominal force.
- Pressure-controlled variable displacement pump with a nominal flow of 20 l/min and pressure of 280 bar.
- Oil tank capacity is approximately 100 liters.
- High-resolution electronic system with ±180000 increments and bus system for up to 8 extension cards.
- Direct signal transmission from sensors to measuring channels without pre-amplifiers.
- Control modes include force, displacement, and extension control.
Catalog excerpts
WPM Leipzig ■ Technical Information UPC 2000 Universal Strength Testing Machine The machine is designed for static tensile, compression, and bending tests in accordance with the Class 1 General Guidelines as stipulated in DIN 51 220 and DIN EN ISO 7500-1. The testing machine is suitable for testing specimens, components, and complete assembles of different materials. High-resolution 18 bit A/D converters ensure precise and fast measuring of analogue values provided by force transducer, displacement transducer, and extension sensors (optional). Machine Frame Two-column single compartment construction Infinitely...
Open the catalog to page 2
WPM Leipzig ■ Technical Information EDC 580 Measuring and Control Device The controller is equipped with a powerful electronic system that features high data resolution of ± 180000 increments, a bus system for a maximum of 8 extension cards, and high computing capacity. Measuring and Processing The measuring signals transmitted by force and displacement sensors as well as extension sensor (optional) are directly sent to the corresponding measuring channel in the controller without a preamplifier. The measuring channels are plugged into a bus slot as modules. A total of 8 slots are available. The...
Open the catalog to page 3
WPM Leipzig · Technical Information Three function keys, one numerical keypad, and an LCD graphic display are available for operating the system. Individual features include: • Menu-controlled test set up • Operator communication via plain-text display and keyboard • Set value input via numerical keypad • Ramp programming (loading rate) RMC7 (Remote Machine Control) for EDC580 controller Handheld unit (cable 3m), which is directly connected to the EDC. The control keys UP, DOWN and STOP as well as a digipoti and an emergency stop button are on the front. The functions on the RMC and on the equivalent...
Open the catalog to page 4All WPM Leipzig catalogs and technical brochures
- Bender
- Windows software
- Automated testing machine
- Indentation hardness tester
- Pneumatic cylinder
- Compression testing machine
- Measurement software
- Interface software
- Benchtop hardness tester
- Vertical testing machine
- Hydraulic bending machine
- Tensile testing machine
- Simulation software solution
- Bending test machine
- Pack unit
- Rockwell hardness tester
- Electromechanical testing machine