- Catalogs
- WPM Leipzig
- Triaxiale Spring Testing Machine
Triaxiale Spring Testing Machine
1 / 2 PagesView full catalog
Triaxiale Spring Testing Machine
Product catalog summary
Overview: The Triaxial Spring Testing Machine by WPM Leipzig is designed for static testing of screw springs with test forces up to 600 kN, classified under class 0.5. It features programmable digital control for automatic operation and evaluation, measuring force and displacement in three axes.
Specifications: The machine is equipped to handle screw springs with a mass of 200 kg, a free height of 1200 mm, and an outer diameter of 650 mm. It allows lateral movement of spring ends under load up to 200 mm in any direction, with side forces measured up to 150 kN. The machine supports standard EN 13298:2003 for compression screw springs testing.
Testing Capabilities: The machine can perform various tests including axial spring way, short time elasticity, deflection steering direction and power measurement, size and rotation of deflection, and cross rate tests.
Technology and Software: The machine uses a three-axis load cell to measure forces and moments in all three dimensions, ensuring comprehensive analysis of spring characteristics. The control and evaluation software is adaptable to customer needs, allowing automatic activation of machine parameters.
Contact Information: WPM Werkstoffprüfsysteme Leipzig GmbH is located at Gewerbegebiet Wachau, Nordstraße 15, 04416 Markkleeberg. They can be contacted via phone at +49 (0) 3 42 97 / 14 35 - 0 or email at [email protected].
See more
Catalog excerpts
Triaxiale Spring Testing Machine
Open the catalog to page 1
WPM Leipzig · Technical Information The spring testing machine for test forces up to 600 kN of the class 0.5 makes it possible to carry out the static tests of screw springs. The equipment of the machine with corresponding power and displacement transducers in connection with a free programmable digital controller is the basis for programmed automatic operation and evaluation. The machine guarantees measuring force and displacement in three axes: in direction of the longitudinal spring axis and in all transverse directions. The following tests can be carried out: Tests of the axial spring...
Open the catalog to page 2All WPM Leipzig catalogs and technical brochures
Related Searches
- Cylinder
- Bender
- Windows software
- Automated testing machine
- Indentation hardness tester
- Pneumatic cylinder
- Compression testing machine
- Measurement software
- Interface software
- Benchtop hardness tester
- Vertical testing machine
- Tensile testing machine
- Simulation software solution
- Universal testing machine
- Hydraulic bending machine
- Bending test machine
- Pack unit
- Rockwell hardness tester
- Electromechanical testing machine
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.