PSD 450
4Pages

Pendulum Impact Tester PSd 450

Pendulum Impact Testers The pendulum impact tester allows performing Charpy impact tests on metals, Izod impact bending tests and, at customer’s request, also impact tensile tests or tests based on Brugger. You have the choice of implementing a pendulum hammer with 150 J or 300 J energy. By adding side plates to the 300 J hammer, the energy can be increased up to 450 J as well. Application According to the technical conditions of standard DIN EN ISO 148, part 2 • Notched-bar impact tests based on Charpy on steel and other metals acc. to DIN EN ISO 148, DIN 50 115, ISO 83, GOST 9454-78, GOST...

Pendulum Impact Testers 2. Safety enclosure The pendulum impact tester is equipped with a complete safety enclosure with safety door according to EN ISO 13489-1. The safety enclosure surrounding the swinging area of the pendulum meets all technical safety requirements. It is impossible to trigger the pendulum when the door is open. After triggering the pendulum and opening the door, the pendulum hammer is stopped immediately. The sides are swivel-mounted. Dismantling when calibrating or repairing the device is not necessary. Thus, a simple handling for the user is guaranteed. After...

Pendulum Impact Testers Accessories Upgrade pendulum hammer 300 Joule to 450 Joule The 300 J hammer can be upgraded easily to 450 J (supplementary equipment of additional masses)  Weight of the 450 J pendulum hammer 29.943 kg  Working range, continuously adjustable 90 ... 450 J Automatic centring device The automatic centring device is applicable for specimens based on Charpy with different dimensions and different notches. It makes it possible to centre the notched specimen automatically when inserting. Spring loaded stopper  Usable preferably for specimens brought to a specific...