LM200 LC144 LoRa Analog Logic Controller Rule Chain
6Pages

{{requestButtons}}

Catalog excerpts

LM200 LC144 LoRa Analog Logic Controller Rule Chain - 1

Industrial LoRa Controller LM200 I/O Tracking Controller Complete LoRa Controller for Analog IO Tracking The LM200/LC100 series utilizes the latest Low Power Wide Area (LPWA) technology to build Modbus/RTU communication for long-distance, widecoverage, and low power consumption wireless IoT applications. Multiple analog inputs and outputs are supported in LC100 series, such as voltage inputs and outputs, current inputs and outputs, PWM output and one RS-485 port for Modbus RTU slave. One LM200 can connect up to 250pcs LC100 LoRa end nodes for two-way communications where field site analog signals are sent from LC100 and mirrors to another LC100 by LM200. The LoRa wireless distance can reach up to 3-6KM distance depending on the environment. The LM200/LC100 series offers great flexibility in wireless IoT applications, such as LED light control without cable , Analog signal reproduced at remote site to replace traditional wiring. Analog I/O Extension & Tracking by LoRa (LC144+LM200) • Transparent /Reproduce Analog Signal by LoRa • LM200 Polling Source LC100 specific Channel and Output to Target LC100 specific Channel • Create /Edit Tracking Rule by Utility Tool • Achieve 2-Sites Analog Tracking V / V, V / A, A / A Auto I/O Tracking (LC144 + LM200) • V / V Tracking – Local Input Voltage , Remote Output Voltage • V / A Tracking – Local Input Voltage, Remote Output Current in V/A Ratio • A / A Tracking – Local Input Current, Remote Output Current 0~10V Input / Output (LC144) • 2 Channels 0~10V High Impedance Input- Luminance Sensing • 1 Channel 0~10V Open Drain Output, Dimmer Control 4~20mA Input / Output (LC144) • 2 Channels Current Sensing, 0.3%High Accuracy • 1 Channel Current Output, 0.3% High Accuracy Event Log & Utility Monitoring (LM200) • 1K Event Log Entries – Polling Fail, Remote Control Fail • On-Line Monitoring by Utility • A / V Tracking – Local Input Current , Remote Output Voltage in A/V Ratio Industrial Application • 20 I/O Rule Entries (Maximum) • 10~30V DC wide power range input Secured & Reliable Radio Communication • ECHO & Re-Send Mechanism • AES 128 Data Encryption • Low Power Consumption • Wide Coverage up to 6KM • -40 ~ 75°C / 90%H Operating Temperature / Humidity • Compliance IEC 61000-6-2/-6-4 Heavy Industrial EMC Windows© Configure Tools • User-Friendly, Model Auto Detection • Analog IO Parameter Read and Write • On-L

Open the catalog to page 1
LM200 LC144 LoRa Analog Logic Controller Rule Chain - 2

✓ Transparent LoRa Communication – Analog I/O Tracking mA 20 V 10 Tag Name (Rule Name) Tracking Rule - Input Tracking Rule -Output ✓ User Friendly Utility to configure Analog IO parameters Easy Created Rule Chain V-V, V-A, A-A, A-V Ratio Control Single Input chains to Multiple Outputs Loop Delay

Open the catalog to page 2
LM200 LC144 LoRa Analog Logic Controller Rule Chain - 3

Power Connector • V+, COM, Earth Ground Input Voltage 0~10V Positive Input Current 4~20mA Positive Input Voltage 0~10V Positive Input Current 4~20mA Positive Output Current 4~20mA Positive Output Voltage(OC) 0~10V Positive Output PWM Voltage 0~5V Positive Output PWM(OC) 0~10V Positive

Open the catalog to page 3
LM200 LC144 LoRa Analog Logic Controller Rule Chain - 4

Wireless Specification Frequency -900 model : Frequency Support EU 868Mhz, US915Mhz, AS 923Mhz, KR 920Mhz -400 model : Frequency Support EU 433Mhz Frequency adjust by Utility Wireless Technology Low Power Wide Area – LoRa MAC Technology Spreading Factor LoRa Demodulator Signal to Noise Ratio: -2.5dB ~ -20dB Operating Mode Modbus protocol over the Air (LoRa MAC Transparent Transmission) with configurable Echo time and retransmission technology LM200 supports Group I/O Tracking function, perform I/O Tracking between one pair of LC144 Forwarding Data Buffer 256Bytes FIFO Data Buffer for LoRa...

Open the catalog to page 4
LM200 LC144 LoRa Analog Logic Controller Rule Chain - 5

Frequency: 100Hz~1KHz with 0.2% Duty-Cycle Accuracy Output Type-1: 5V, 200mA (Max) Output Type-2: Open Collect (O.C.), 10V /200mA (Max) Power (On): System Power applied LoRa (Blinking): LoRa RF Signal on Communication Power Requirement Input Rating Typical DC 24V, Rating: 10~30V 3-Pins Removable Terminal Connector for V+ ,Com and Earth Ground Reverse Protection Power Consumption LM200: 1 Watt @ DC 24V power input LC144: 3 Watts @ DC 24V power input Mechanical Installation Enclosure Material Ingress Protection 26(D) x 102.5 (H) x 72 mm (W) / with wall mounting clip Environmental Operating...

Open the catalog to page 5
LM200 LC144 LoRa Analog Logic Controller Rule Chain - 6

LoRa /Modbus RTU Client Agent 1 x RS-485 Slave 2-wire, 1 x SMA Antenna Connector LM200-900: support EU868,AS923, KR920,US915 with frequency adjustable LoRa /Modbus RTU Client Agent 1 x RS-485 Slave 2-wire, 1 x SMA Antenna Connector LM200-400: support EU433 with frequency adjustable LoRa End-Node, 8CH AIO, 1 Modbus RTU 485 Host 2 x 0~10V input, 0.2% accuracy 2 x 4~20mA input, 0.3% accuracy 1 x 0~10V Output, Open Collect (O.C.) Type, 0.2% accuracy 1 x 4~20mA Output, 0.3% accuracy 1 x PWM Output (0~5V), 200mA (max), 0.2%Duty_Cycle Accuracy @1khz 1 x PWM (0~10V), Open Collect (O.C.) Type,...

Open the catalog to page 6

All WoMaster catalogs and technical brochures

  1. DS412/DP412

    9 Pages

  2. WR222 Series

    6 Pages

  3. DP612

    5 Pages

  4. DS612

    5 Pages

  5. MP614

    5 Pages

  6. DS306

    4 Pages

  7. DS406

    4 Pages

  8. DP406

    4 Pages

  9. DP406 series

    4 Pages

Archived catalogs

  1. RP428

    5 Pages

  2. EN110

    3 Pages

  3. RP428

    4 Pages

  4. RP428

    4 Pages

  5. RP428

    4 Pages

  6. RS428

    4 Pages

  7. RS628

    4 Pages

  8. WR309/WR309P

    7 Pages