Catalogs >
WoMaster >
DS412/DP412

DS412/DP412
9Pages

Catalog excerpts

^Industrial Din Rail Ethernet Switch Industrial Cyber Security and Enhanced ERPS v2 Managed (PoE+) Switch for Critical Applications DS412/DP412 Industrial 8G + 4GF Layer 2 Cyber Security Switch The 12 Port Gigabit L2 Managed Switch DS412/DP412 supports critical cyber security features such as Port Based Security-IEEE802.1 x MAB (MAC Authentication Bypass) , Access Control List (ACL, MAC/IP/ARP filter), DHCP Snooping, IP Source Guard, Dynamic ARP Inspection as well as advanced redundancy features such as WoMaster ERPSv2 Plus and eRSTP. The rugged EMC design of DS412 is certified by IEC 61850-3/IEEE 1613/EN 50121-4 standard that is the best choice for substation and railway wayside applications. The PoE design for DP412 delivers up to 240w power budget over the 8 Giga PoE+ port. Full Gigabit Switching and Ultra-high Throughput • 12-port Full Gigabit Ethernet with 8 GbE RJ45 and 4 100M/1G SFP fiber ports • DDM function for high quality fiber connectivity monitoring • 16K MAC address table • 1.5MByte packet buffer memory for H.264 burst • 9K bytes jumbo frame • Stores and forwards with non-blocking switch fabric • 8 flexible Class of Service(CoS) queues, 512 L2 Multicast Groups for video applications WoMaster ERPSv2 PLUS Ring Technology • Apply Broadcom® CFM Technology for overcoming GbE copper physical limitation and providing minimum 20ms recovery time, seamless restoration time • Inter-Operability with 3rd party ITU-T G.8032 v1/v2 ERPS switch and still remain fast recovery time • Replace legacy Ring + Chain + Dual Homing Compliant with IEC62443-4-2 Level 3 / 4 Cyber Security • L2-L7 IPv4/IPv6* Access Control List (ACL) • DHCP Snooping, IP Source Guard, Dynamic ARP Inspection • 802.1Q VLAN, Private VLAN, Advanced Port Security • Multi-Level user passwords • HTTPS/SSH/SFTP, 256-bit encryption • 802.1X MAB for non-802.1X compliant end devices • RADIUS/TACACS+ centralized password authentication Industrial IoT LAN & Cloud Management • Various configuration paths, including CGI WebGUI, CLI, SNMP and RMON • Support WoMaster Software Utilities: -NetMaster Network Management System -ViewMaster for Configuration Management -ThingMaster*, ThingMaster OTA* for device management over Cloud* • Support MQTT* protocol, ready to use AWS/Azure and Private Cloud Agent for cloud management • LLDP for topology control, auto-topology drawing • USB for easy field configuration and firmware update Enhanced RSTP(eRSTP) • Enhance the RSTP fault recovery time performance • Enhance RSTP performance for large ring network topologies with up to 80 switches Rugged Design for Substation/Wayside • DS412- IEC 61850-3/ IEEE 1613 for Substation • EN50121-4 for railway trackside applications • Top level EMC protection and excellent heat dissipation design for operating in -40~85oC environment • 8-port IEEE 802.3af/at compliant PoE, up to 30W/port *Future Release • Up to 240W power budget • Complete PoE management including per-port Power Budget Control, PoE Scheduling and PoE Status

Open the catalog to page 1

✓ ITU-T G.8032 ERPSv2 gives ultimate Inter-Operability, Flexibility, and Scalability G.8032 v.2 ERPS is becoming the most common standard for redundancy on industrial networks and replacing proprietary ring redundancy and standard Ethernet Ring Switching, as it provides stable protection of the entire Ethernet Ring from any loops and open standard for 3rd party devices. The ITU-T G.8032 v2 ERPS recovers the network break within less than 20ms recovery time thus significantly increases network reliability for critical IIoT applications, such as heavy industrial automation (power substation...

Open the catalog to page 2

Features & Benefits✓ Advanced Port Based Security- IEEE802.1 x MAB (MAC Authentication Bypass) PLC In addition to MAB, the authentication can also be done by the preconfigured static or auto-learn MAC address table in the switch. MAB enables port-based access control by bypassing the MAC address authentication process to TACACS+/Radius Server. Prior to MAB, the endpoint's (ex. PLC) identity is unknown and all traffic is blocked. The switch examines a single packet to learn and authenticate the source MAC address. After MAB succeeds, the endpoint's identity is known and all traffic from that...

Open the catalog to page 3

Features & Benefits✓ IP Source Guard IP source guard provides source IP address filtering on a Layer 2 port to prevent a malicious host from impersonating a legitimate host by assuming the legitimate host's IP address. The feature uses dynamic DHCP snooping and static IP source binding to match IP addresses to hosts on untrusted Layer 2 access ports. Initially, all IP traffic on the protected port is blocked except for DHCP packets. After a client receives an IP address from the DHCP server, or after static IP source binding is configured by the administrator, all traffic with that IP...

Open the catalog to page 4

Integrated Power Connector ・1 x 8-pin terminal block 4 pin for redundant power input 2 pin DI 2 pin DO ・Easy installation System LED ・ 2 x Power ・ 1 x System Status ・ 1 x DI ・ 1 x DO ・ 1 x Ring Status Easy System Management ・USB for Configuration/Firmware update ・RS232 console Gigabit Fiber Ethernet ・4-port 100/1000M SFP

Open the catalog to page 5

Integrated Power Connector ・1 x 8-pin terminal block 4 pin for redundant power input 2 pin DI 2 pin DO ・Easy installation Gigabit Ethernet with PoE ・8-port 100/1000MBase-T ・IEEE 802.3 af/at PoE System LED ・ 8 x PoE ・ 2 x Power ・ 1 x System Status ・ 1 x DI ・ 1 x DO ・ 1 x Ring Status Easy System Management ・USB for Configuration/Firmware update ・RS232 console Gigabit Fiber Ethernet ・4-port 100/1000M SFP

Open the catalog to page 6