*mydirectindustry

DS306

Product catalog summary

Overview
The DS306 series is an industrial 6-port managed Ethernet switch designed for rugged environments, particularly suitable for IP surveillance. It features a robust design to withstand mechanical deformation, operates in a wide temperature range of -40 to 70°C, and supports a wide voltage range of 12-48VDC. It complies with IEC 61000-6-2/4 standards for heavy industrial environments.

High Throughput Ethernet Switching
The switch includes 4 Gigabit Ethernet ports and 2 standard ST fiber connectors, supporting an 8K MAC address table and non-blocking switch fabric for efficient data handling.

Management Features
It offers multiple configuration options via WebGUI, CLI, Telnet, and SNMP V1/V2c/V3/trap. Additional features include LLDP topology control, USB for configuration and firmware updates, and IEEE 1588v1/2 PTP time management. The switch supports network management through a software utility interface and NMS system for component monitoring.

Redundancy and Recovery
The DS306 supports ITU-T G.8032 v1/v2 ERPS Ring Redundancy, providing sub-50ms protection and recovery switching for Ethernet traffic. It is compatible with third-party industrial and commercial switches, ensuring efficient network interconnection and topology.

Technical Specifications
The switch is equipped with 4 100/1000MBase-T RJ45 ports and 2 100BaseFX ST or SC connectors. It includes system LEDs for power, system status, and fiber port activity. The power input is via a 6-pin removable terminal block, supporting redundant power input and digital output for relay alarms.

Optical Fiber Specifications
Single-mode fiber supports up to 30KM distance with a wavelength of 1310nm, while multi-mode fiber supports up to 2KM. The power requirement is 24VDC with a maximum power consumption of 7.2W at full load.

Mechanical and Environmental Specifications
The switch is designed for DIN rail installation, with a steel and aluminum enclosure, IP30 ingress protection, and dimensions of 67.9 x 149 x 125 mm. It operates in temperatures from -40°C to 70°C and has a MTBF of over 200,000 hours.

Compliance and Warranty
The DS306 series complies with safety standard EN60950-1 and EMC standards EN61000-6-2/EN61000-6-4. It is covered by a 5-year warranty.

Model Variants
Available models include DS306-SS-SC-30, DS306-SS-ST-30, DS306-MM-SC-2, and DS306-MM-ST-2, differing in fiber mode and connector type.

Package Contents
Each package includes the product unit, a 6-pin removable terminal connector, an attached DIN clip, and a quick installation guide.

Catalog excerpts

WoMaster Smart Gigabit Ethernet Switch with ERPS Fiber Ring Backup DS306 series Industrial 6-port Managed Ethernet Switch DS306 is an industrial L2 smart managed Ethernet switch equipped with 4 Gigabit Ethernet ports with 2 100M ST/SC single-mode/multi-mode fiber transceivers for up to 30KM distance. The NetMaster configuration utility and USB port for configuration file can help mass installation and site support. DS306 supports latest ERPS v2 ring standard and is fully compatible with 3rd party devices for flexible network planning. Wide operation temperature design (-40~70°C) can withstand critical industrial environment. All switches pass 4 hours 60°C stress test before delivery to ensure utmost quality. High Throughput Ethernet Switching • 6-port Ethernet, including 4 Gigabit Ethernet port and 2 standard ST fiber connectors • 8K MAC address table • Stores and Forwards with non-blocking Switch Fabric Rugged Design for IP Surveillance • Robust design protects from mechanical deformation • Wide operating temperature and humidity range -40~70oC, 95%humidity • Wide operating voltage range 12~48VDC • IEC 61000-6-2/4 Heavy Industrial Environment Management Features • Various configuration paths, including WebGUI, CLI, Telnet, SNMP V1/V2c/V3/trap • LLDP topology control • USB for easy field side configuration and firmware update • *IEEE 1588v1/2 PTP time management • Software utility interface for LAN devices management • *NMS system for individual component monitoring ITU-T G.8032 v1/v2 ERPS Ring Redundancy • An ITU standard Ring redundancy Protocol • Provide sub-50ms protection and recovery switching for Ethernet traffic • Interoperate with 3rd party industrial switch and still remain fast recovery time • Interoperate with commercial switch instead of STP/RSTP • Efficient network interconnection and topology with ERPS Chain, multiple chain

Open the catalog to page 1

System LED ・ 2 x Power ・ 1 x System Status ・ 1 x DO ・ 2 x Fiber Port ・ 2 x Ring Status Gigabit Ethernet Easy System Management ・USB for Configuration/Firmware update Fiber Ethernet ・2-port 100M SC/ST Connector Integrated Power Connector ・1 x 6-pin terminal block 4 pin for redundant power input 2 pin DO

Open the catalog to page 2

All WoMaster catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list