Industrial Din Rail Media Converter Mini-size Gigabit Ethernet Fiber Converter for Industry DS201 Industrial 1-port Gigabit Ethernet to Fiber Media Converter The industrial-grade fiber optic media converter DS201 can operate in either low latency converter mode or store & forward switching mode. The fiber interface supports 100Mbps/1000Mbps SFP by dip switch configuration. It detects and changes to switch mode if the copper and fiber speed or duplex are different. In converter mode, the Link Fault Pass-Through (Link Loss Forwarding) reaches low latency with bidirectional alert and auto-recovery. The 16Kbytes jumbo frame forwarding capability guarantees high-speed Giga communications. Wide operation temperature -40~75C and heavy industrial EMC design brings DS201 suitable for any industrial application. Ethernet Media Converter Industrial Compliance • Converts Optical Signal and Gigabit Ethernet Electrical Signal • SFP Socket Supports IEEE 802.3u 100Base-FX, IEEE 802.3az 1000Base-FX • High Level Electro Magnetic Susceptibility – Level 3 Link Fault Pass Through / Link Loss Forward • Bi-Directional Link Loss Forwarding for Real Time FarEnd Fault Link Alert • Bi-Directional Auto Recovery for Ethernet Optical Fiber and Ethernet RJ-45 Communication Dual Forwarding Modes • EN 50121-4 Railway Track Side EMC Easy DIP switch Configuration • Forced RJ-45 100Mbps Half Duplex • Forced Fiber 100Mbps • Link Fault Pass Through / Link Loss Forward Hardened System Design • Operates Under -40 ~75°C Environment Pure Converter: • Wide Range Redundant Power Input, 10~60Vdc or AC18~30V • RJ-45 and Fiber working in balanced Speed and Duplex mode • Minimum Forwarding Latency – 8.2x10-9 Sec. Ethernet Switching Store-and-Forward: • RJ-45 and Fiber working in un-balanced speed and duplex mode • TX 100/1000Mbps Auto-Negotiation, Auto MDI/MDI-X • IEEE 802.3x Flow-Control & Back-Pressure • CRC Error Packet Filtering Large Packet Forwarding • 16Kbytes Jumbo frame for Gigabit speed forwarding Compact Size Design • Minimal Install Space Requirement • Easy Cable Reorganization Special Vertical Market Application • Factory Automation – Real Time Machine Communication • Railway Track Side – PLC Communication

Steel Metal, IP31 System LED • 1x Power • 1x LFP • 2x Fiber Status DIP Switch • LFP (Off, On) • RJ45 (Auto/Off, 100H/On) • SFP Speed (1000M/Off, 100M/On) Power Input Chassis Grounding Screw • 4-Pin Removable Terminal Connector 6 • Dual Power Input • DC 10~60V, or AC 18~32V

Technology Standard IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX/ 100Base-FX Fast Ethernet IEEE 802.3ab 1000Base-T / IEEE 802.3z Gigabit Fiber IEEE 802.3x Flow Control and back-pressure Performance Forwarding Mode Switching Mode: Store and Forward technology with CRC Check Pure Converter: Direct Forward packet with lower latency Note: if RJ-45 speed and duplex mode is not the same as Fiber, the device works in Switching mode Packet Buffer Memory Transfer performance 1488100pps, supports 16KBytes Jumbo frame size Interface Ethernet Port 1 x Ethernet RJ45, 10/100/1000Mbs Auto Negotiation,Auto...

Environmental Operating Temperature & Humidity Storage Temperature Hi-Pot Insulation AC1.0KV for Power/Ethernet port to Chassis Ground Standard Safety * CISPR 22, FCC part 15B Class A IEC61000-4-2 ESD EN61000-4-3 RS EN61000-4-4 EFT EN61000-4-5 Surge EN61000-4-6 CS EN61000-4-8 Magnetic Field Model Name Industrial Gigabit Ethernet Fiber Media Converter, 1 RJ-45, 1 SFP Socket, Redundant Power, DC 10~60V, AC18~30V Package List 1 x Product Unit 1 x 4-pin Removable Terminal Connector 1 x Attached Din Clip 1 x Quick Installation Guide © WoMaster Inc. All rights reserved. Updated 09,July,2021 v0.5 Specifications...