Catalogs >
Wolf Safety Lamp Company >
Mini & Micro Torch

Mini & Micro Torch
3Pages

Catalog excerpts

WORLD’S LEADING MANUFACTURER OF HAZARDOUS AREA PORTABLE & TEMPORARY LIGHTING Micro and Mini Torch Zones: 0, 1,2, 20, 21 and 22 Product Overview Features & Benefits The Micro and Mini Torches use high-tech light sources to give impressive performance with a compact size, designed for easy pocket storage, and are CE marked to the ATEX Directive and IECEx certified for safe use in potentially explosive gas, vapour, mist or dust atmospheres, where a T4 or T5 temperature class permits. All models are approved to Group I for use in mining applications. The LED models; M-10 Micro, M-40 and M-60 Minis are approved as Category 1 equipment for use in Zones 0, 1 and 2, and M-20 Xenon Mini is approved as Category 2 equipment for use in Zones 1 and 2. The M-10 Micro has a single white 5mm ‘Nichia’ LED light source and is powered by four alkaline LR44 ‘button cells’, giving an impressive beam with a two hour duration from a very compact size. The M-20 Mini uses a Xenon filament bulb powered by two LR03 ‘AAA’ cells, giving an excellent narrow beam of light with good range and up to 2.3 hours duration. The M-40 Mini has a cluster of three white 5mm ‘Nichia’ LEDs, and the M-60 Mini uses a single high power Cree LED giving remarkable light output; both products are powered by three alkaline LR1 ‘N’ cells giving up to ten hours of usable light with the M-40 and up to 3.5 hours* of usable light with the M-60. All supplied with cells. The Micro and Mini Torches have an ergonomic design and are constructed from high quality thermoplastic resin, with excellent impact and chemical resistance and the polycarbonate lens is set-back within the lens ring to minimise risk of damage. All models have a lanyard hole (M-10 Micro supplied with neck cord), an integral pocket clip for secure retention and to prevent roll on a flat surface, and a push-button for single-handed switching, which is shrouded to guard against accidental operation. All models are certified IP67, sealed against water/dust ingress. ■ ATEX and IECEx Certified ■ T4/T5 temperature class ■ Ultra small size ■ Lightweight, ergonomic design ■ Proven impact resistance ■ Single handed switching ■ Switch protection shroud ■ Integral pen style pocket clip ■ IP67 water and dust tight ■ Gas and Dust Approval (M-20 Not Dust approved) ■ Group I Mining Approval

Open the catalog to page 1

■ *M-60 battery duration/light output is dependent on battery make and type. ■ All information has been gathered under laboratory conditions, the user must regard the values given as approximate. ■ Changes may be made to the above specification without notification, details are available on request. Product Dimensions Light Output 145mm 68mm M-10 Spot Beam (approx. 13°) Peak luminous intensity at 2.5m 8 lux M-20 Spot Beam (approx. 6°) Peak luminous intensity at 2.5m 100 lux M-40 Spot Beam (approx. 18°) Peak luminous intensity at 2.5m 15 lux M-60* Spot Beam (approx. 8°) Peak luminous...

Open the catalog to page 3