LinkEx™ Portable Fluorescent Leadlamp Emergency


Catalog excerpts

LinkEx™ Portable Fluorescent Leadlamp Emergency - 1

WORLD’S LEADING MANUFACTURER OF HAZARDOUS AREA PORTABLE & TEMPORARY LIGHTING Features & Benefits Product Overview The LinkEx™ Portable Fluorescent Leadlamp is suitable for a multitude of applications where a temporary light is required for extended periods of time and is CE marked to the ATEX Directive and IECEx Certified for safe use in Zones 1 and 2 potentially explosive gas, vapour, mist and dust atmospheres, where a T3/T4 temperature class permits. Available with twin side by side forward facing, or quad back to back energy efficient fluorescent lamp combinations in a wide range of voltages (24V - 254V). The leadlamps can be supplied with direct cable entries or fitted with ATX plugs/sockets to allow the units to be instantly linked in series (plug and play), allowing for quick and easy installation over a large area. Rugged construction, and compact design allow lights to be connected together in the explosive atmosphere while energised. Unistrut compatible mounting points on the lamps provide a flexible installation solution allowing them to be quickly and easily fixed in position on pipes, scaffold or a ferrous backdrop with magnetic fixings. Accessories are available to provide a quick, easy and low cost solution for mounting the lamps. Easy maintenance is a key feature of the LinkEx™ Portable Fluorescent Leadlamp, re-lamping is simple and quick using standard compact fluorescent lamps readily available from electrical retailers and the operation takes a few minutes and can be done by a competent electrical engineer. The leadlamp is also certified to the ‘End of Life’ protection circuit ballast for enhanced safety, in accordance with HSE safety notice 8/05. ■ ATEX and IECEx Certified for Zone 1 & 2 explosive gas and dust atmospheres ■ Fitted with plugs and sockets to link in series ■ Twin or quad lamp configuration ■ Compact & robust design ■ Wide voltage range 24V - 254V ■ Uses standard compact fluorescent lamps for ease of maintenance ■ Control ballast incorporates 'End of Life' protection circuit ■ Integrated Unistrut compatible mounting points ■ Emergency version available ■ Industrial version available Certifications

Open the catalog to page 1
LinkEx™ Portable Fluorescent Leadlamp Emergency - 2

■ All products supplied with 4mm2 SY Cable and ATX plugs/sockets as standard. CEAG and Stahl Plugs and Sockets available on request. Ships braided cable for offshore applications to BS6883 available on request. All products supplied with fluorescent lamps fitted as standard.

Open the catalog to page 2
LinkEx™ Portable Fluorescent Leadlamp Emergency - 3

All information has been gathered under laboratory conditions, the user must regard the values given as approximate. Changes may be made to the above specification without notification, details are available on request. Product Dimensions Light Output 2 x 36W 180° or 4 x 36W 360° Peak luminous iIntensity at 2.5m 190 lux, at 5m 50 lux Wolf Safety Lamp Company, Saxon Road Works, Sheffield, S8 0YA, UK T: +44 (0) 114 255 1051 E:

Open the catalog to page 3

All Wolf Safety Lamp Company catalogs and technical brochures

  1. TR-60;TR-65

    2 Pages

Archived catalogs

  1. M-85 Torch

    3 Pages


    3 Pages


    3 Pages

  4. Markerlite

    3 Pages

  5. Hazard Lamp

    3 Pages