Catalog excerpts


WORLD’S LEADING MANUFACTURER OF HAZARDOUS AREA PORTABLE & TEMPORARY LIGHTING Product Overview Features & Benefits The ATEX Worklite is a rechargeable high output LED floodlight for use in harsh remote applications for extended periods, as it offers unique levels of light output, operational duration and robustness in a self-contained battery powered lamp, and is CE marked to the ATEX Directive for safe us in Zones 1 and 2 potentially explosive gas, vapour, mist and dust atmospheres, where a T4 temperature class permits. Three ATEX Worklite models are available: WL-85 with a 12 LED lamp head giving over 1000 lumens output, WL-70 with a 6 LED lamp head giving over 500 lumens output and WL-80 with a 12 LED lamp head plus the smaller battery of WL-70 giving a more portable unit with 1000 lumens of light output. All models deliver a piercing 30° beam and a flood of lower level fringe light and for low maintenance the LED light source has a 25,000-hour life. ■ ATEX Approved for Zone 1 explosive gas and dust atmospheres ■ High power white LED beam with flood of lower level fringe light ■ LED light source ‘fitted for life’, no bulb replacement required ■ Long duration, up to 12 hours full power, 24 hours half power ■ Robust durable stainless steel construction ■ Locking pivot head to direct light ■ Toughened glass lens with optional disposable lens guard ■ Rechargeable high capacity battery, fully managed ■ State of charge LED indication ■ Supplied with a mains charger with state of charge indication, powered from 100 to 254Vac The duration of WL-85 and WL-70 are up to 12 hours on ‘high power’ and Certifications up to 24 hours on ‘low power’ and WL-80 is up to 6 hours on 'high power' and up to 12 hours on 'low power'. In addition to dual light output levels, the control circuit manages switch function, battery level indication, emergency powerfail illumination and low battery cut-off, maintaining and protecting the battery from deep discharge damage. The ATEX Worklite's stainless steel construction is designed to withstand the rigours and corrosion in harsh industrial and offshore applications, plus the battery and control circuit are within a box enclosure giving IP65 protection from ingress of dust and water jets. The anodised aluminium lamp pivotable head is also IP65 sealed and designed as a heatsink for the LED light source, plus has an impact resistant 6mm toughened glass lens. In shot blasting and painting applications, the lens can be protected using a disposable antistatic lens guard (3 su

Open the catalog to page 1

All information has been gathered under laboratory conditions, the user must regard the values given as approximate. Changes may be made to the above specification without notification, details are available on request. Product Dimensions Light Output WL-70 18W LED Beam (approx 30°) Peak luminous intensity at 5m 120lux WL-85 & WL-80 36W LED Beam (approx 30°) Peak luminous intensity at 5m 210lux Wolf Safety Lamp Company, Saxon Road Works, Sheffield, S8 0YA, UK T: +44 (0) 114 255 1051 E:

Open the catalog to page 3

All Wolf Safety Lamp Company catalogs and technical brochures

  1. TR-60;TR-65

    2 Pages

Archived catalogs

  1. M-85 Torch

    3 Pages


    3 Pages


    3 Pages

  4. Markerlite

    3 Pages

  5. Hazard Lamp

    3 Pages