Catalogs >
Wolf Safety Lamp Company >
ATEX LED Inspection Leadlamp Accessories

ATEX LED Inspection Leadlamp Accessories
2Pages

Catalog excerpts

ATEX LED Inspection Leadlamp Accessories - 1

WORLD’S LEADING MANUFACTURER OF HAZARDOUS AREA PORTABLE & TEMPORARY LIGHTING Cage with Fixing Bolt (SP-620) Cage with 88mm Diameter Magnet (SP-626) Product Overview Wolf's range of accessories, encompassing protection sleeves, cages and magnets, for the ATEX LED Inspection Leadlamp SP-600 give workers a wide range of flexible temporary installation solutions and added equipment protection for using temporary lighting in hazardous area working environments. Protection Sleeve When used regularly in coating and painting applications, the disposable Protection Sleeve Kit (SP-628) prevents residue build-up in dirty or paint-filled atmospheres. The sleeve is easy to fit and replace via re-usable tie wraps secured at either end, ensuring the product is always clean and delivering maximum light output without obstructions from dirt and/or debris on the lens. The cage accessory can be used with the protection sleeve but must be fitted to the outside. The retaining bolt will pierce the sleeve. Magnet With a 66mm Diameter Magnet (SP-624) the leadlamp can be positioned to grip on a flat ferrous metal surface for secure mounting almost anywhere -putting the leadlamp exactly where it is needed. Cage The stainless steel Cage guard offers enhanced mechanical protection to the leadlamp when fitted to ensure its longevity in harsh working conditions. The Cage is supplied in two forms: ■ Cage with Fixing Bolt (SP-620) ■ Cage with 88m Diameter Magnet (SP-626) The 88mm diameter magnet has a greater clamp force than the 66mm diameter magnet and will offer higher levels of retention on surfaces with poor finishes and must only be used with the cage accessory. All accessories listed here have been assessed safe for use in potentially explosive atmospheres, and are covered within the SP-600 ATEX (SIRA15ATEX3317X) and IECEx (IECEx SIR15.0115X) certificates. Only genuine Wolf accessories will maintain ATEX/IECEx compliance of the product.

Open the catalog to page 1

ATEX LED Inspection Leadlamp Accessories - 2

■ All information has been gathered under laboratory conditions, the user must regard the values given as approximate. ■ Changes may be made to the above specification without notification, details are available on request. Wolf Safety Lamp Company, Saxon Road Works, Sheffield, S8 0YA, UK T: +44 (0) 114 255 1051 F: +44 (0) 114 255 7988 E: info@wolf-safety.co.uk www.wolf-safety.co.uk

Open the catalog to page 2