1. Catalogs
  2. Woertz
  3. Spring clamp terminals

Spring clamp terminals

Spring clamp terminals
1 / 44 PagesView full catalog

Spring clamp terminals

Product catalog summary
Company Overview:
Woertz AG, founded in 1928, is a family-owned company located in Muttenz, Switzerland, with an additional branch in Hölstein. The company focuses on manufacturing circuitry accessories, installation systems, and electronic control systems. Woertz is certified with ISO 9001 and ISO 14001, highlighting its commitment to security, user-friendliness, and ease of handling in its products.
Product Range:
The company's product offerings include terminals, junction boxes, grounding products, surge protection devices, flat cable installation systems, floor ducts, and electronic modules. Circuitry accessories and electronic control systems are produced at the headquarters, while duct systems are manufactured in Hölstein.
Spring Clamp Terminals:
These terminals are designed for mounting on 35mm rails as per EN 60715 TH 35 standards. They come in configurations with 2, 3, or 4 clamps, suitable for wire sizes from 1.5mm² to 16mm². Made from polyamide 66, these terminals are known for their hardness, rigidity, and thermal endurance.
Technical Specifications:
Polyamide 66 is used for insulation, offering low combustibility, self-extinguishing properties, and being halogen-free. The terminals are corrosion-resistant, vibration-resistant, and suitable for marine systems and hazardous locations.
Accessories and Approvals:
Accessories include test adaptors, marking cards, and cross-junction racks. Terminals are rated according to IEC and UL standards, with specific ratings for different wire sizes and configurations. Detailed technical data on mechanical, thermal, and electrical properties are provided.
Electrical Components Specifications:
The document details specifications for various electrical components such as female connectors, test adapters, disconnecting plugs, component plugs, diode plugs, fuse plugs, marking accessories, and mounting rails.
Female Connectors:
Designed for transit terminals with a 2.5mm² grid and 5.08mm spacing, rated for 250V/12A, with pole numbers ranging from 2 to 12.
Protection Against Accidental Contact:
Transparent protection for contact pins when female connectors are removed, with specific article numbers for different configurations.
Test Adapters:
Suitable for all spring clamp terminals except specified series, made of gold-plated brass with specific dimensions and protective features.
Disconnecting and Component Plugs:
Includes diode and fuse plugs with detailed specifications for voltage, current, and safety features.
Marking Accessories:
Marking cards and strips for terminals with various label sizes and printing options, including order information and special characters for custom printing.
Mounting Rails and Accessories:
Rails made of steel, stainless steel, or copper with specific dimensions and thermal resistance. Accessories include cable fasteners, clamps, and supporting studs for mounting rails.
Standards and Compliance:
Components comply with EN 60715 standards for mounting rails, with detailed cross-section standards for round copper conductors provided.
See more

Catalog excerpts

Spring clamp terminals-1

SPRING CLAMP TERMINAL Woertz AG Hofackerstrasse 47, P.O. Box 948, CH-4132 Muttenz 1, Switzerland Phone ++41 (0)61 466 33 33, Fax ++41 (0)61 461 96 06 www.woertz.ch Woertz USA 151 Discovery Drive, Unit 111 Colmar, PA 18915 Phone (215) 997 8855, Fax (800) 522-3868 www.woertz-usa.com, e-mail: [email protected] 1.3

 Open the catalog to page 1
Spring clamp terminals-2

Eupii i-idw ■■■ILiljfc iiLKk\l tetHStl joaniil MiYHI

 Open the catalog to page 2
Spring clamp terminals-3

Spring clamp terminals to mounting rails 35mm according to EN 60715 TH 35 Index Introduction Spring clamp terminals pages 1.3.4 to 1.3.9 pages 1.3.10 to 1.3.28 Spring clamp terminals with 2 clamps 2.5-16mm2 . . . . . . . . . . . . . . . . . . . . . . . . . . .1.3.10-1.3.11 Spring clamp ground conductor terminals with 2 clamps 2.5-16mm2 . . . . . . . . . . . . .1.3.12-1.3.13 Spring clamp terminals with 3 clamps 1.5-6mm2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.3.14-1.3.15 Spring clamp ground conductor terminals with 3 clamps 2.5-6mm2 . . . . . . . . . . . . . . . . . . . .1.3.16...

 Open the catalog to page 3
Spring clamp terminals-4

Introduction Company profile The Woertz company was founded in 1928; our head office is in Muttenz near Basle, Switzerland. We are a family business with about 220 employees known as a quality manufacturer of circuitry accessories, installation systems and electronic control systems. Our goals are: - security, - user-friendliness, - and easy handling of our products. We are certified according to ISO 9001 and ISO 14001. Our range of products includes: - terminals, junction boxes, grounding products, surge protection devices, anchor channels and anchoring studs - flat cable installation systems...

 Open the catalog to page 4
Spring clamp terminals-5

for Qualify and Management Systems KQS hi_n™iih teniiicK thai Ifie UOJJUJLIII^ jdfuued betow has a management svstca whitlb dl^HS [he L'CfluiltljlCflR of the normative bxacx <ipr£ified hvUiw Whole Company, location Mntlenz and Holstcin Electrical accessories, Installation systems mi Hie basis of audir rcsii It the Ttli? SfJS C.'-crtrticflte is vaEitl up F<I HEUL including 24 Junt 2005

 Open the catalog to page 5
Spring clamp terminals-6

Introduction Properties of the insulating materials The insulating bodies of our terminals are made of polyamide 66. Even if this polyamide is subjected to a constant temperature of 100°C, it fulfills the electrical, mechanical and chemical properties required in terminals. The typical features of polyamide 66 are hardness, rigidity, scuff resistance and thermal endurance. Fuse terminals and fuse plugs, where constant temperatures of over 100°C can occur, are made of polyamide 66 reinforced with fibreglass. Polyamide 66 is hardly combustible, self-extinguishing and halogen-free (when a fire breaks...

 Open the catalog to page 6
Spring clamp terminals-7

Introduction Connection type Spring clamp connecting terminals To connect one conductor to each clamp. Springs of stainless steel. Corrosion resistant, also suitable for marine systems, for systems with high temperature variations, vibration resistant. Approved for hazardous locations. 1.3.7

 Open the catalog to page 7
Spring clamp terminals-8

Spring clamp terminal overview Spring clamp terminals to mounting rails 35mm according to EN 60715 TH 35 Spring clamp terminals Spring clamp terminals with 2 clamps 2.5-16 mm2 series 35310/.. pages 1.3.10 - 1.3.11 Spring clamp terminals with 3 clamps 1.5-6 mm2 series 35330/.. pages 1.3.14 - 1.3.15 Spring clamp ground conductor terminals with 3 clamps 2.5-6 mm2 series 35330/..V page 1.3.16 Spring clamp terminals with 4 clamps 2.5+4 mm2 series 35340/.. page 1.3.17 Spring clamp ground conductor terminals with 4 clamps 2.5+4 mm2 series 35340/..V page 1.3.18 Spring clamp terminal with 2 cross-connections...

 Open the catalog to page 8
Spring clamp terminals-9

Spring clamp terminal overview Spring clamp terminals to mounting rails 35mm according to EN 60715 TH 35 Spring clamp terminals Disconnecting transit terminal 2.5 mm2 Art.No. 35470/3SV Knife disconnecting terminal 2.5 mm2 Art.No. 35350/3TM page 1.3.24 page 1.3.25 Spring clamp fuse terminals 4 mm2 for fuses 5x20mm Art.No. 35490/.. page 1.3.27 Spring clamp fuse terminals 4 mm2 for fuses 1/4”x1 1/4” Art.No. 35495/.. page 1.3.28 Partitions and end barriers, end retainer Cross-junction racks, cross-connectors and funnel-shaped cable entrances pages 1.3.30-1.3.31 pages 1.3.32-1.3.33 Female connectors,...

 Open the catalog to page 9
Spring clamp terminals-10

Spring clamp terminals with 2 clamps 2.5-6 mm2 PA 66 - Springs of stainless steel - Connecting bar of tinned copper - Marking with label or marking strip - Easy introduction of strands of the nominal cross-section even without end sleeves - Use funnel-shaped cable entrances for introducing wires and strands with smaller cross-sections - Insulated, recessed and separable cross-junction racks for 10 terminals 2.5 4 5 31 6 6 35 8 35 55.5 65.5 65.5 Ex terminals also available (see Ex flyer) Article numbers Ratings 0.2-2.5 mm2 800V/24A grey blue green and yellow (insulated earthing conductor) 35310/3GR...

 Open the catalog to page 10
Spring clamp terminals-11

Spring clamp terminals with 2 clamps 10+16 mm2 PA 66 - Springs of stainless steel - Connecting bar of tinned copper - Marking with label or marking strip - Easy introduction of flexible stranded conductors of the nominal cross-section even without end sleeves - Insulated, recessed, 2-part crossconnectors for vertically shifted connection of adjacent terminals 10 16 10 43 12 44 74 84 Article numbers Ratings 1.5-10 mm2 800V/57A grey blue green and yellow (insulated earthing conductor) 35310/10GR 35310/10BL 35310/10E 16-6 AWG 600V/60A 2.5-16 mm2 800V/76A 14-4 AWG 600V/63A 35310/16GR 35310/16BL 35310/16E...

 Open the catalog to page 11
Spring clamp terminals-12

Spring clamp ground conductor terminals with 2 clamps 2.5-6 mm2 PA 66 - Springs and base part of ground conductor of stainless steel - Connecting bar of tinned copper - Marking with label or marking strip - Easy introduction of strands of the nominal cross-section even without end sleeves - Use funnel-shaped cable entrances for introducing wires and strands with smaller cross-sections - For recessed cross-connections 2.5 4 5 8 35 35 31 6 6 55.5 65.5 65.5 Ex terminals also available (see Ex flyer) Article numbers Ratings 2.5 mm2 to terminals for polar conductor 12 AWG 4 mm2 35310/3 6 mm2 35310/4...

 Open the catalog to page 12
Spring clamp terminals-13

Spring clamp ground conductor terminals with 2 clamps 10+16 mm2 PA 66 - Springs of stainless steel - Connecting bar and base part of ground conductor of tinned copper - Marking with label or marking strip - Easy introduction of flexible stranded conductors of the nominal crosssection even without end sleeves 10 16 10 43 12 44 74 84 Article numbers Ratings 10 mm2 to terminals for polar conductor 6 AWG 16 mm2 35310/10 Important information 35310/16 35310/10V green with yellow marking 4 AWG 35310/16V Technical data Strip insulation mm 18 18 Packing unit 50 50 pcs. Spring clamp ground conductor terminals...

 Open the catalog to page 13

Archived catalogs

  1. Junction Boxes

    19  Pages

  2. Screw terminals

    140  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.