Modules for safety and monitoring
16Pages

{{requestButtons}}

Catalog excerpts

Modules for safety and monitoring - 1

MODULES FOR SAFETY AND MONITORING Woertz AG Hofackerstrasse 47, P.O. Box 948, CH-4132 Muttenz 1, Switzerland Tel. ++41 61 / 466 33 33, Fax ++41 61 / 461 96 06 http://www.woertz.ch Woertz-USA 151 Discovery Drive, Unit 111 Colmar PA 18915 Tel. (215) 997 8855, Fax (800) 522-3868 http://www.woertz-usa.com, e-mail: woertz1@erols.com 23

Open the catalog to page 1
Modules for safety and monitoring - 3

Diode terminals: SnapLine with diodes 1A / 1000 V 23.5 Diode modules with diodes to be connected individually 23.6 Diode modules with common anode 23.7 Diode modules with common cathode 23.8 Diode modules for general alarm and lamp test 23.9 Modules with indicators: LED indicators with lamp test and general alarm 23.10 Modules with indicators: Signal recorder module 23.11 Modules with fuseboards for fuses type 5 x 20 mm 23.12 Modules with fuseboards with supervision 23.13 Transient Suppressor: SnapLine overvoltage protection 23.14 Modules for overvoltage protection with varistors 23.15

Open the catalog to page 3
Modules for safety and monitoring - 4

Modules for safety and monitoring Introduction Thanks to the modules described in this brochure, safety or monitoring functions may easily be incorporated into circuits. Diode modules have a wide field of applications such as polarity protection, logical functions, general alarm, lamp test, recovery diode or rectifier functions. Modules with indicators allow a direct and easy monitoring of the voltage applied on various conductors. Modules with fuseboards offer the possibility to protect power supplies or outputs against the failure of the individual devices and also to limit the supplied...

Open the catalog to page 4
Modules for safety and monitoring - 5

Diode terminals SnapLine with diodes 1A / 1000 V Properties - SnapLine terminals with integrated diodes - Through-going, lamp control and common alarm functions - Applications: rectifier, surge suppression, logical functions, polarity protection etc. - Two Snap-Lines can easily be connected as a 1.6 A full wave rectifier bridge - Modular stacking of common alarm or lamp control functions 45378T/2D Accessories 30407T 30403 30413RO 30413BL 30790 81535/x 30411, 12 80247, 48 35455/55xx End barrier Compatible 3-level terminal Cross connection 20-pole red Cross connection 20-pole blue Cross...

Open the catalog to page 5
Modules for safety and monitoring - 6

with diodes to be connected individually Modules with diodes for general purpose With white cover protecting against inadvertent Wiring diagram printed on cover For clipping on to DIN rails according to 30413RO Junction rack 20 pole red 30413BL Junction rack 20 pole blue Other types of diodes |WJr| Technical data (Ta = 25°C) Max. diode blocking voltage Max. diode blocking current Diode on-state voltage Max. diode on-state current at single load General data Nominal cross section of connecting terminals Operating temperature range

Open the catalog to page 6
Modules for safety and monitoring - 7

Diode modules with common anode Range 45472B/08A Properties - Modules with diode circuit with common anode - Modules with a great area of applications for instance for lamp tests - Removing the wire bridge J1 (under the cover) enables the module to be split into two separate units - With white cover protecting against inadvertent contact - For clipping on to DIN rails according to EN 60715 TH 35-7.5 and EN 60715 TH 35-15 45472B/16A 45472B/32A 45472B/32A Accessories 30413RO Junction rack, 20 poles, red 30413BL Junction rack, 20 poles, blue On request Other types of diodes Technical data (Ta...

Open the catalog to page 7
Modules for safety and monitoring - 8

Diode modules with common cathode Range 45472B/08K Properties - Modules with diode circuit with common cathode - Modules with a great area of applications for instance for general alarms - Removing the wire bridge J1 (under the cover) enables the module to be split into two separate units - With white cover protecting against inadvertent contact - Wiring diagram printed on cover - For clipping on to DIN rails according to EN 60715 TH 35-7.5 and EN 60715 TH 35-15 45472B/16K 45472B/32K 45472B/32K Accessories 30413RO Junction rack, 20 poles, red 30413BL Junction rack, 20 poles, blue On request...

Open the catalog to page 8
Modules for safety and monitoring - 9

For general alarm and lamp test Modules for general alarm and lamp test Different types: 16U: 16 channels with general alarm, lamp test 32Z: 32 channels with general alarm and lamp With white cover protecting against inadvertent Wiring diagram printed on cover For clipping on to DIN rails according to 30413RO Junction rack, 20 poles, red 30413BL Junction rack, 20 poles, blue Other types of diodes Max. diode blocking voltage Max. diode blocking current Diode on-state voltage Max. diode on-state current at single load General data Nominal cross section of connecting terminals Operating...

Open the catalog to page 9
Modules for safety and monitoring - 10

Modules with indicators LED indicators with lamp test and general alarm Marking facilities with self-adhesive labels With lamp test for checking the LED General alarm output Diode blocking voltage Diode blocking current Diode on-state voltage General data Operating temperature Order numbers Rated voltage

Open the catalog to page 10
Modules for safety and monitoring - 11

Modules with indicators Signal recorder module Properties - LED signalize and memorize one or several active inputs - Relay switches potential-free contact, as soon as one input is active - Reset-function by push button or over terminals - Easy marking by means of marker pen or labels 45251B/24 45251B/115 R+ 1 R- 24 V DC 2 Reset 3 4 14 5 12 6 7 11 8 0 V (N) Technical data (Ta = 25°C) Versions Supply and signal voltage External reset voltage Max. external reset current Max. supply current (8 active inputs) Max. signal current / input Min. signal pulse length Relay contacts General data...

Open the catalog to page 11
Modules for safety and monitoring - 12

Modules with fuseboards for fuses type 5 x 20 mm Range 45130C Properties - Compact - Protected fuses 45319A/4 45319A/8 45319A/8 2 2 1 1 Technical data (Ta = 25°C) Versions Number of poles For fuses General data Operating temperature Size W x H x D Order numbers 23.12 2 2 1 1 4 3 2 1 4 3 2 1 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 2 channels horizontal 4 channels vertical 8 channels vertical 2 5 x 20 mm up to max. 6.3 A 4 5 x 20 mm up to max. 10 A 8 5 x 20 mm up to max. 10 A -20°C up to +40°C 30 x 83 x 43 mm -20°C up to +60°C 30 x 83 x 58 mm -20°C up to +60°C 60 x 83 x 58 mm 45130C 45319A/4 45319A/8

Open the catalog to page 12
Modules for safety and monitoring - 13

Modules with fuseboards with supervision Properties - Consist of 4 fuses, the state of which indicated through red LED - Failure of one of the fuses activates the general alarm relay (changeover contact may be used with an external visual or audible alarm) - For fuses type 5 x 20 mm up to 6.3 A 45225B/1 1 2 45225B/2 3 4 12 14 M N 11 1 Technical data (Ta = 25°C) Versions Number of fuses Operating voltage (at the fuses) Minimum load current Maximum load current (fuse) Leakage resistance when fuse has blown Relay operating voltage (M+N) Type of relay switch Contact rating (general alarm relay)...

Open the catalog to page 13

All Woertz catalogs and technical brochures

  1. ATEX-Sortiment

    15 Pages

  2. FE180/E90

    12 Pages

Archived catalogs

  1. Junction Boxes

    19 Pages

  2. Screw terminals

    140 Pages