Database to Raptor RF concentrator / Media coupler
15Pages

RAPTOR RF concentrator / Media coupler Application instructions Woertz AG Hofackerstrasse 47 Postfach 948 CH-4132 Muttenz 1 Tel. +41 61 466 33 33 Fax +41 61 461 96 06 info@woertz.ch www.woertz.ch

Application instructions "RAPTOR RF Concentrator / Media Coupler" (Art. 49596) 1. How does it operate? The RF input concentrator / Media coupler of the Raptor series allows the RF push button to be connected to the KNX Bus via a unidirectional RF connection. The RF input concentrator can be programmed by means of the ETS3 software and provides 32 channels. Each channel can be individually configured. The main functions are: dimming, shutter / blind control, heating, priority, timer, value and scene. The antenna is located within the housing. The concentrator can therefore easily be mounted...

Application instructions "RAPTOR RF Concentrator / Media Coupler" (Art. 49596) 2. ETS Parameters The different functions are explained below on the base of the ETS3 Software. The database of the device can also run on ETS2 Software. 2.1. Menu General Here you can select the main operating mode of the device. Different or advanced parameters are available according to the chosen mode. This parameter defines for the dimmer and shutter/blind function the detection time of a hold down pressure. Values: 400 ms. 500 ms, 600 ms, 700 ms, 800 ms, 900 ms, 1s. Default value: 500 ms Version v00,...

Application instructions "RAPTOR RF Concentrator / Media Coupler" (Art. 49596) 2.2. Menu Channels and communication objects From channel 1 to 32 the menu is identical. When loading the application under ETS3 following functions are available. 2.2.1 Functions: ON / OFF, Toggle and Timer These functions allow the lighting circuit or any other load to be switched ON or OFF. 2.2.11 Function: ON / OFF The ON / OFF parameter defines the commands to be sent when pressing and releasing the pushbutton of the RF input or the pushbutton connected with the RF input. ON /-, OFF/-, ON / OFF, OFF / ON, -...

OK J [ Cancel ] [ Default ] [ Help

Application instructions "RAPTOR RF Concentrator / Media Coupler" (Art. 49596) 2.2.22 Function: Dimming using two buttons The Dimming parameter allows the using mode to be selected. Values: 1-button dimmer or 2-button dimmer. Default value : Variation 1 button 2-button dimmer (Dim up, Dim down) This parameter defines the dimming direction associated with the pushbutton, Values: Dim up or Dim down. Default Value: Dim up 2.2.3 Function: Shutters / Blinds This function allows a shutter or a blind using one or two buttons to be controlled. 2.2.31 Function: Shutters / Blinds with one button The...

Application instructions "RAPTOR RF Concentrator / Media Coupler" (Art. 49596) 2.2.32 Function: Shutters / Blinds with two buttons and press for a long time The Shutters / Blinds parameter allows the using mode to be selected: Function: 1-button control or 2-button control. Default value: 1-button control 2-button control (Up, Down) or press for a long time (Safety) This parameter defines the movement associated with the button. Up/Down or Down. Default value : Up/Down. 2.2.4 Function: Heating This function allows a heating or air-conditioning set-point to be selected. This parameter allows...

Application instructions "RAPTOR RF Concentrator / Media Coupler" (Art. 49596) 2.2.5 Function: Priority This function allows priority start or priority stop controls to be sent. This parameter allows a Priority type to be selected. It depends on the type of application. ON priority, OFF priority. Default value: ON priority. 2.2.6 Function: Scene This function allows a scene to be created. Function Scene This parameter defines the scene number. Scene 1 to scene 32. Default value: Scene 1 This parameter authorizes or forbids the learning of the scene. Authorized or Inhibited (Forbidden)....

Application instructions "RAPTOR RF Concentrator / Media Coupler" (Art. 49596) 2.2.6 Function: Value This function allows different values to be sent. The Value parameter defines the kind of value to be sent. Value type: Value in %, Temperature, Luminosity level, Brightness value, Value. Possible values: - Value in %: 0% to 100% by steps of 1%. Default value : 0% - Temperature: 0°C to 40°C by steps of 0.5°C. Default value : 20°C - Luminosity level: 0 lux to 1000 lux by steps of 50 lux. Default value : 300 lux - Brightness value: 0% to 100% by steps of 1%. Default value : 0% - Value: 0 to...

Application instructions "RAPTOR RF Concentrator / Media Coupler" (Art. 49596) 3. RF configuration The unidirectional RF inputs of the Raptor RF concentrator / Media coupler can be configured by means of a plug-in integrated in the ETS3 Software. It is first necessary to add the Raptor RF concentrator / Media coupler in your project. Click with the right mouse button on the concentrator to be configured. Then click on « RF configuration » (see picture below). Version v00, 24/02/10 10 / 15

Application instructions "RAPTOR RF Concentrator / Media Coupler" (Art. 49596) 3.1 RF Configuration screen: - The Fold window contains all inputs (32 Inputs). - The Available RF Inputs window contains all unidirectional RF inputs learned by the RF concentrator / Media Coupler. - The Linked RF Inputs of current fold window contains, if applicable, all unidirectional inputs linked with the selected channel. - The << button allows one or more unidirectional inputs to be added to a channel. - The >> button allows to erase one or more unidirectional inputs associated with a channel in case of a...

Application instructions "RAPTOR RF Concentrator / Media Coupler" (Art. 49596) 3.2 Learning one or more unidirectional RF inputs: - Click on the Learn RF button - The following screen will be displayed: - Press on the RF pushbuttons you want to connect to one or more RF inputs of the RF input concentrator / media coupler (for example: 000946400207 0/0/014) - All unidirectional RF inputs will then be displayed in the Available RF inputs window. Version v00, 24/02/10 12 / 15