Stopping and positioning modules for automation technology Product overview
Stopping and positioning modules for automation technology Product overview
Wörner provides a wide range of stopping and positioning modules for automation technology, suitable for various industrial sectors. The product line includes undamped and damped separating stops, angle dampers, index cylinders, and anti-bounce stops, available with pneumatic and electromechanical drives. Custom solutions and accessories are also offered to meet specific customer needs.
- Anti-bounce Stops: Ensure precise pallet positioning to prevent rebound.
- Undamped Separating Stops: Economical design for accumulating pallets at defined positions.
- Damped Separating Stops: Suitable for shock-sensitive parts, gently decelerating pallets to avoid rebound.
- Index Cylinders: Provide precise vertical lifting for rapid positioning tasks.
- Angle Dampers: Ideal for changing direction during the conveyance of fragile parts.
Wörner products are known for their durability and low maintenance, supported by DIN ISO 9001 and ISO 14001 certifications. Each product undergoes extensive endurance testing and a 100% final inspection, including leakage tests, to ensure reliability and economic efficiency.
Customers should select the product family and group, then refer to the relevant table and data sheet for the appropriate variant. Custom solutions are available for projects with special requirements.
Wörner specializes in developing custom-built solutions based on specific customer needs, with examples provided in the document.
The document outlines different product variants, each with specific weight capacities and operational speeds. For example, the DBS-20/60 model can handle pallet weights ranging from 3.5 kg to 60 kg, depending on the conveyor speed. Systems are categorized by temperature resistance and type of stop.
The document explains the basic functions of lowering and stopping, detailing calculations for propelling and deceleration forces. Formulas are provided to determine these forces based on the coefficient of friction, pallet weight, and conveyor speed, with example calculations included.
The document emphasizes selecting the appropriate product variant based on specific application needs, such as lowering stroke, temperature range, and stop design. It highlights the significance of the coefficient of friction in determining system performance.
A range of accessories is available to enhance the functionality of the stopping systems, including position sensors, sensor brackets, and air connections.
Detailed explanations of key concepts such as propelling force, deceleration force, and damping stroke are provided. A glossary of terms is included to aid understanding.
Wörner Automatisierungstechnik GmbH provides contact details for customer support and international sales partners, emphasizing their commitment to exceptional service and support.
Catalog excerpts
Stopping and positioning modules for automation technology Product overview
Open the catalog to page 1
Damping, stopping, positioning: The right solution for every requirement Outstanding performance through Wörner‘s unique product portfolio Our exhaustive range contains products for all conventional transfer and assembly systems. We can supply the ideal product for every stopping point across many different industrial sectors! The portfolio includes undamped and damped separating stops, as well as angle dampers, index cylinders and anti-bounce stops – available with both pneumatic and electromechanical drives. In addition, we develop customer-specific, tailormade special solutions and supply...
Open the catalog to page 2
Uncompromising quality and performance Quality assurance through comprehensive workpiece inspection using state-of-theart measurement methods An example of exceptional durability: For over ten years, these Wörner stoppers have been operating without maintenance at our customer MCI Mirror Controls in Souzhou (China). Our company has both DIN ISO 9001 and ISO 14001 certification. When developing new products, we perform extensive endurance tests to make sure they have the required characteristics. Every single unit is subjected to a testing examination before it can leave our factory. Satisfied...
Open the catalog to page 3
Product overview Product family WorneR a> > o Product group | The easy way to find the right product: First of all, choose the product family and product group. Then look for the corresponding basic product in the relevant table. Separating stops You can find the right product variant for your system using the data sheet associated with each basic product. Please also refer to the technical explanations on pages 24/25. The name of the product variant also serves as its order code (see notes on page 26). If you need help identifying the variant you need, just get in touch with our service hotline:...
Open the catalog to page 4
EW/DW H/K I/E cust.-spec. solutions var. access. EW/DW kcust.-spec. solutions var. access. Note: The scope of application for undamped stoppers is highly dependent on the conditions of use, in particular on the coefficient of friction between the conveyor equipment and pallet and on the rigidity of the conveyor. We can provide you with detailed technical advice when making your choice - just ask us! EW single-acting DW double-acting H heat-resistant K cold-resistant I prepared for inductive G stop plate position sensor with thread E prepared for electronic position sensor EW/DW H/K I/E cust.-spec. solutions var....
Open the catalog to page 5
WorneR EW single-acting DW double-acting H heat-resistant K cold-resistant EW/DW H/K E cust.-spec. solutions var. access. EW/DW H/K cust.-spec. solutions var. access. DBS -20/60 DBS -140 DBS -150 DBS -170 E prepared for electronic position sensor KI tilt stop KU plastic stop KA plastic stop antistatic S prepared for stop position sensing EW/DW H/K E KI/KU/KA S cust.-spec. var. access. EW/DW H cust.-spec. solutions var. access. EW/DW H/K E KI cust.-spec. solutions var. access. S19 steel stop, 19 mm wide S21 steel stop, 21 mm wide S31 steel stop, 31 mm wide S50 steel stop, 50 mm wide S100 steel...
Open the catalog to page 6
WorneR EW single-acting DW double-acting H heat-resistant K cold-resistant I prepared for inductive position sensor E prepared for electronic position sensor EW/DW KI cust.-spec. solutions var. access. EW/DW KI cust.-spec. solutions var. access. EW/DW cust.-spec. solutions var. access. EW/DW H/K KI/KU/KA I cust.-spec. solutions var. access. EW/DW H/K KI/KU/KA, I clean room ISO Kl. 5 cust.-spec. var. access. EW/DW H/K I cust.-spec. solutions var. access. EW/DW H/K cust.-spec. solutions var. access. EW/DW H/K KI cust.-spec. solutions var. access. EW/DW H/K KI cust.-spec. solutions var. access....
Open the catalog to page 7
Electric damped separating stops WorneR DEL0 - 14 mm EW single-acting DW double-acting KI tilt stop KU plastic stop 120-5-R DELW 5 Rotary Switch cust.-spec. solutions var. access. * All specifications given for a coefficient of friction of ^ = 0.07 Custom-built: ELU-30-07-KI-002 ■ The unit has a special additional function: The pallet can run over it in the direction opposite to the actual conveyor direction. As a result, the stopping point is disabled in the reverse direction. cust.-spec. solutions var. access. EW/DW cust.-spec. solutions var. access. Custom-built: DEL-60-08-8-001 ■ The unit...
Open the catalog to page 8
Pneumatic damped separating stops for roller systems WorneR Custom-built: D BS R-400-15-EW-004 The unit possesses an integrated anti-bounce stop designed to keep the pallet in position after the damping operation. It is also preassembled with pre-adjusted clamping holders designed for the installation of inductive sensors to determine the stop positions. * All specifications given for a coefficient of friction of p = 0.07 EW/DW cust.-spec. solutions var. access. EW/DW cust.-spec. solutions var. access. 5 EW/DW cust.-spec. solutions var. access. EW/DW cust.-spec. solutions var. access.
Open the catalog to page 9
WorneR H heat-resistant K cold-resistant DBSQ -20/60 DBSQ -170 DBSQ -150-T4 KU plastic stop KA plastic stop antistatic W angle stop G straight stop cust.-spec. solutions var. access. DBSQ -300 DBSQ -400 DBSQ -1100 n/a * All specifications given for a coefficient of friction of g = 0.07 Custom-built: 3842545128 This unit is equipped with a special stop.
Open the catalog to page 10
Anti-bounce stops WorneR NL.® cr H heat-resistant I prepared for inductive position sensor E prepared for electronic position sensor cust.-spec. solutions var. access. cust.-spec. solutions var. access. Custom-built: DI-1050-15-007 This unit was designed as a round construction in contrast to our usual index cylinders. It is also equipped with an integrated cover. Custom-built: 8 DRP-001 This unit possesses a different housing geometry: increased height, recesses at the side, and threaded holes at the bottom of the case to permit fastening from below.
Open the catalog to page 11
Product-specific accessories We offer an extensive range of accessories to accompany our products. For details, please refer to the relevant data sheets. Productindependent accessories Position sensor for pallet Sensor bracket By way of example, the accessories illustrated here are for the pneumatically driven, damped separating stop DBS-20/60: heat-resistant cold-resistant bottom-mounted sensor side-mounted sensor Air connections Assembly kits Stop plates
Open the catalog to page 12
