185mm-System power 2500A
14Pages

System advantages The 185mm-System power is designed for use in ecient power distribution assemblies with a high short-circuit withstand capacity. The narrow design of the NH in-line fuse switch disconnectors, typical for these systems, enables the best possible use of the limited space in the control cabinet. Thanks to the large centre distance of the 185mm-System power, a short-circuit withstand capacity of at least 100kA can be achieved. Fast connection means that all components of the 185mm-System power can also be tted in a few simple steps. Timeconsuming drilling of busbars can be a...

The universal busbar support allows 10mm thick DIN at and section busbars to be assembled without drilling The NH in-line fuse switch disconnectors size 00 to 3 are accommodated in the 185mmSystem power without drilling Current transformers can be easily added to the standard unit No additional space requirements, simply pivot into place Transformer available in various measurement ranges and precision classes

Busbar supports 185mm, 3-pole Type Pack size for drilled flat busbars Busbar E-Cu, tin-plated, length 2.40m Type WxH 30 x 10 40 x 10 50 x 10 60 x 10 80 x 10 100 x 10 120 x 10 Shorter lengths on request; for busbar cover see page 3/9 Busbar connector, to connect flat busbars and la. Cu Terminal space WxL 40 x 20 40 x 32 50 x 32 63 x 40 63 x 50 80 x 40 Connection for flat busbars up to 40 x 25 Push-on screw connector, for cable lugs DIN 46 234 Type for undrilled flat busbars, 10mm thick for undrilled flat busbars, 10mm thick and double-T and triple-T section Pack size Pack size FIBUS®,...

Universal busbar supports 185mm, 3-pole Type Pack size for undrilled flat busbars 30 - 120 x 10 and double-T and triple-T section busbars 4 combined with SECUR®LeanStreamer size 1-3 mountable above. Exception: with terminal clamps at bottom, can only be connected on busbars up to maximum 60mm wide. End cover, for covering busbar ends, incl. mounting material for 01 230 Cross section Pack size Weight kg/100 u. double-T busbar section, tin-plated 2400 500 1 1062.0 2400 720 1 1554.0 triple-T busbar section, tin-plated 2400 1140 1 2462.4 Shorter lengths on request; for current carrying capacity...

SECUR®LeanStreamer size 00, NH in line fuse switch disconnector, 3-pole switching, bottom/top connection Type Rated Size Pack size Weight current kg/100 u. screw M8 / clamp 70mm² 160A NH00 1 137.0 with terminal space cover, for use in the 185mm-System power with adapters 33 236, 33 237 and 33 282 SECUR®LeanStreamer size 00, NH in line fuse switch disconnector, 3-pole switching, bottom/top connection, with electronic fuse monitoring, 400V AC Type screw M8 / clamp 70mm², with electron. fuse monitoring NH00 with terminal space cover, for use in the 185mm-System power with adapter 33 236, 33...

SECUR®LeanStreamer size 1 - 2 - 3, NH in-line fuse switch disconnector, 3-pole switching, bottom/top connection Type screw M10 screw M10 screw M12 V-direct connection V-direct connection V-direct connection SECUR®LeanStreamer size 1 - 2 - 3, NH in-line fuse switch disconnector, 1-pole switching, bottom/top connection screw M10 screw M10 screw M12 SECUR®LeanStreamer size 1 - 2 - 3, NH in-line fuse switch disconnector, 3-pole switching, bottom/top connection, with electronic fuse monitoring, 400V AC screw M10 screw M10 screw M12 Circuit diagram for fuse monitoring on page 9/25...

Trim strips Type for open and switch strips trims for outer units can be screwed on from side Terminal clamp, for assembly without drilling in the 185mm-System, on 10mm busbars, double-T and triple-T section for bottom connection for top connection Pilot switch, for monitoring lid position Pilot switch, 1 reversing switch: 250V AC / 5A; 30V DC / 4A flat push-on connector 2.8 x 0.5 (DIN 46 244-A) Support bracket for fixing the front trims Connection accessories Type clamp connection for Cu conductor rm, f + AE, la. Cu wedge clamp terminal, single, for Cu/Al cond., rm, sm, f, f +AE wedge...

Current transformer, precision class 1, rated secondary current 5A, flat push-on connector 6.3 x 0.8 (DIN 46 244-A) Type Rated Size Rated apparent Pack size current power VA for direct mounting in the 150A 00-3 3.0 3 SECUR®LeanStreamer; for size 00 using 200A 00-3 3.0 3 an adapter requires a fixing clip 250A 00-3 4.0 3 300A 00-3 5.0 3 400A 00-3 5.0 3 500A 00-3 5.0 3 600A 00-3 5.0 3 the transformer cannot be combined in conjunction with the terminal clamp with the following busbars: terminal clamp 33 301 and 33 101 with 100mm and 120mm busbars. Current transformer, suitable for calibration,...

NH bus-mounting fuse base size 00 - 1 - 2 Type Rated Size current clamp 70mm² 160A screw M8 160A screw M10 250A screw M10 400A 1-pole, without shock protection, suitable for direct mounting on busbars NH bus-mounting fuse base size 00 - 1 - 2 - 3 screw M8 160A screw M10 250A screw M10 400A screw M12 630A 1-pole, without shock protection, for screwing onto drilled busbars Shock protection, for 1-pole NH bus-mounting fuse bases Type 2 sections Grip lug cover, suitable for NH bases with shock protection grip lug cover, 1 unit required for each fuse 2 units required to cover a fuse Accessories...

Universal busbar support, 100mm-System, 3-pole Type for undrilled flat busbars 30, 40, 50, 60 x 10 Busbar E-Cu, tin-plated, length 2.4m, shorter lengths on request Dimensions Cross section 2400 x 30 x 10 2400 x 40 x 10 2400 x 50 x 10 2400 x 60 x 10 further cross sections see page 2/2 and 2/4 Busbar cover, length 1m Type Pack size Pack size Pack size Push-on screw connector, for cable lugs DIN 46 234 Connection for undrilled flat busbars, 10mm thick for undrilled flat busbars, 10mm thick and double-T and triple-T section Busbar adapter 200A, for 100mm-System, with clamp connection 70mm2 Type...

SECUR®LeanStreamer size 00, NH in-line fuse switch disconnector, 3-pole switching, bottom/top connection Type Rated current clamp 70mm² / screw M8 160A with terminal space cover, directly connectable in the 100mm-System SECUR®LeanStreamer size 00, NH in-line fuse switch disconnector, 3-pole switching, bottom/top connection, with electronic fuse monitoring, 400V AC clamp 70mm² / screw M8 160A with terminal space cover, directly connectable in the 100mm-System, circuit diagram for fuse monitoring on page 9/25 NH in-line fuse base size 00, 3-pole wedge clamp terminal 70mm² Accessories, for...