sprocket

Product catalog summary

Overview: The document provides comprehensive specifications and options for standard sprockets for roller chains, adhering to DIN and ASA standards. It covers materials, dimensions, customization options, and includes detailed technical data.

Specifications:

Types of Sprockets: Available in Simplex, Duplex, and Triplex configurations, with options for single or double-sided hubs.
Materials: Sprockets are made from steel, cast iron, and injection-moulded acetal resin.
Dimensions: Maximum turned diameter is 1450 mm, and maximum teeth diameter is 1500 mm.
Chain Compatibility: Compatible with standard and non-standard chains, with pitches from 4 mm to 76.2 mm (3 inches).

Customization:

Sprockets can be customized based on specific drawings, including dimensions, heat treatment, and tooth design.
Special orders and custom designs are available upon request.

Stock Program:

Includes a variety of sprockets and chain wheel plates, with detailed part numbers and specifications.
Options for induction-hardened and stainless steel sprockets are available.

Technical Data:

Tables provide measurements such as number of teeth, diameters, and weights for various sprocket models.
Specifications for chain and sprocket standards, including DIN 8187 and DIN 8192, are provided.

Recommendations:

Consultation with engineering experts is recommended for application-specific solutions.
Contact the engineering department for competitive pricing and further assistance.

Chain and Sprocket Standards:
Chains are specified according to DIN 8187, and sprockets according to DIN 8192, ensuring compatibility and quality.

Product Listings:
Lists various simplex, duplex, and triplex sprockets and platewheels, including dimensions, number of teeth, and part numbers.

Key Measurements:

Simplex sprockets: Width of tooth B1 is 7.2 mm.
Duplex sprockets: Width of tooth B2 is 21.0 mm.
Triplex sprockets: Width of tooth B3 is 34.9 mm.

Material and Construction:
Steel and cast iron are used for sprockets, with injection-moulded options available. Minimum material strength is 500 N/mm².

Tables and Data:
Extensive tables list sprocket dimensions, weights, and part numbers, providing a guide for selection based on requirements.

Key Data: Includes tables with precise measurements for each sprocket type, ensuring compatibility with specific chain sizes and applications. Material specifications indicate a minimum tensile strength of 500 N/mm² for steel components.

Materials and Standards:
All bolt-on hubs for plate wheels are made of steel with a minimum strength of 500 N/mm², available with or without keyways according to DIN 6885 sheet 1.

Dimensions and Parameters:
Detailed table of dimensions for bolt-on hubs, including bore size, keyway dimensions, and weight, indicating compatibility with specific plate wheels.

Procedures and Recommendations:
WMH bolt-on hubs can be used to assemble plate wheels into sprockets with hubs on one or both sides. Examples of bolt-on hub numbers and their compatible plate wheel numbers are provided.

Pitch and Teeth Information:
Lists various pitches and corresponding measurements, such as 3/8x7/32" and 1/2x1/8", along with the number of teeth for selection.

Catalog excerpts

Standard-Kettenräder für Rollenketten nach DIN und ASA Standard-Sprockets for Roller Chains to DIN and ASA Lagerprogramm Kettenradscheiben und Kettenräder - Simplex, Duplex, Triplex; in Abhängigkeit von Teilung und Zähnezahl als einfache oder verstärkte Scheibe; mit einseitiger Nabe; in Stahl-, Grauguss-, Kunststoff-Ausführung erhältlich Kettenräder mit beidseitiger Nabe Kettenräder gehärtet - Simplex Kettenräder rostfrei - Simplex Kettenräder für Klemmbuchse - Simplex, Duplex Kettenräder nach ASA - Simplex Anbaunaben für Kettenradscheiben stock programme L 1 - L 36 Chain Wheel Plates and Sprockets - Simpex, Duplex, Triplex; dependent on pitch and number of teeth available as simple or reinforced plate; with hub on one side; Materials: Steel, Cast Iron, Injection Moulded Acetal resin L 37 - L 38 L 39 - L 40 L 41 - L 42 L 43 - L 46 L 47 - L 49 L 50 - L 51 Sprockets with double sided Hub - Simplex Sprockets Induction Hardened - Simplex Sprockets Stainless Steel - Simplex Taper Lock Sprockets - Simplex, Duplex Sprockets to ASA - Simplex Bolt on Hubs for Plate Wheels Sonderanfertigungen made to order Auf Anfrage on request Kettenräder sprockets max. Dreh-Ø 1450 mm max. Verzahnungs-Ø 1500 mm nach Ihren Wünschen bzw. Zeichnungen max. turned-Ø 1450 mm max. teeth-Ø 1500 mm to your drawing Kettenräder sprockets Verzahnung passend für alle genormten und nicht genormten Gelenkketten von 4 mm bis 76,2 mm (3“) Teilung. St- und GG-Ausführung to suit any chain standard and nonstandard chains for pitch 4 mm up to 76,2 mm (3“) steel and cast iron Kettenräder sprockets einbaufertig bearbeitet, Abmessungen, Warmbehandlungen, Werkstoffe und Verzahnungsarten entsprechend Ihren Zeichnungen ready to be installed; dimensions, heat treatment materials and teeth to your drawing Unsere Konstrukteure beraten Sie gerne bei der Realisierung Ihrer Anwendung - Fordern Sie uns heraus! We offer more than competitive prices - contact our engineering department!

Open the catalog to page 1

All WMH Srl catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list