Splined Shafts & Sleeves

Product catalog summary

Overview: The document provides technical specifications and product details for splined shafts and sleeves, including custom manufacturing options, material specifications, and compliance with DIN 5463/ISO 14 standards.

Specifications:

Custom Manufacturing: Shafts and hubs with multi-key profiles, kerb toothing, and single groove outer profiles up to a maximum diameter of 180 mm and length of 1600 mm, milled and ground.
Broaching: Inner profiles with a maximum tool diameter of 90 mm, work-piece diameter of 400 mm, and broach length of 200 mm.
Drawing: Inner profiles with a maximum work-piece diameter of 1500 mm, bore diameter of 400 mm, groove length of 425 mm, and groove width of 50 mm.

Materials:

Splined Shafts: Made from steel 1.0511 (C40).
Splined Sleeves: Made from steel 1.0727 (45 S 20 K) and phosphor-bronze for specific parts.

Product Range:

Various sizes of splined shafts and sleeves are available, with detailed part numbers and weight specifications provided for each configuration.
Products are available with or without flanges and holes, depending on the application requirements.

Standards Compliance: All products comply with DIN 5463/ISO 14 standards, ensuring compatibility and quality.

Additional Information: The document encourages contacting the engineering department for custom solutions and highlights competitive pricing.

Catalog excerpts

Keilwellen & Muffen Splined Shafts & Sleeves Lagerprogramm Keilwellen Keilwellen-Muffen Sonderanfertigungen Auf Anfrage Wellen und Naben mit Mehrkeilprofilen, Kerbverzahnungen, Einzelnuten, Außen-Profile bis max. Ø 180 mm Länge bis max. 1 600 mm gefräst und geschliffen Wellen und Naben Innen-Profile, Räumen: Werkzeug-Ø max. 90 mm, Werkstück-Ø max. 400 mm, Räumlänge max. 200 mm Wellen und Naben Innen-Profile, Ziehen: Werkstück-Ø max. 1 500 mm, Bohrungs-Ø max. 400 mm Nutlänge max. 425 mm Nutbreite max. 50 mm stock programme I1 I1-I2 Splined Shafts Splined Sleeves made to order on request shafts and hubs with splines channal toothing, single groove outer profile up to max. Ø 180 mm length up to max. 1 600 mm milled and ground shafts and hubs inner profile, broaching tool-Ø max. 90 mm; work-piece-Ø max. 400 mm, length of broach max. 200 mm shafts and hubs inner profile, drawn: work-piece-Ø max. 1 500 mm bore-Ø max. 400 mm groove length max. 425 mm groove width max. 50 mm Unsere Konstrukteure beraten Sie gerne bei der Realisierung Ihrer Anwendung - Fordern Sie uns heraus! We offer more than competitive prices - contact our engineering department!

Open the catalog to page 1

All WMH Srl catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list