Preloaded Double Pinion

Product catalog summary

Specifications:
The document introduces a new Preloaded Double Pinion system available in both straight and helical teeth configurations. The material used is case-hardened steel 1.7131 (16MnCr5) with ground teeth. The pressure angle is specified as 19° 31' 42'' or 20°, and the toothing quality is 6 e25. Modules range from 2 to 8.

Load Tables:
Load values are provided under conditions of 2.5 m/s speed, KA = 1.25, 20,000 hours, and grease lubrication. The tables detail the number of teeth, maximum torque, speed, and flange specifications for both straight and helical teeth configurations.

Assembly Instructions:
The assembly process for the Preloaded Double Pinion involves several steps: attaching to the gearbox, installing disc springs, using a diagram for desired preload, and securing with a locking screw. Key steps include attaching the preloaded pinion, positioning the pressure plate with Hirth-Coupling, and preloading until backlash-free.

Key Data from Tables:
For module 3 with 15 teeth, the maximum torque without preload is 109 Nm and with maximum preload is 55 Nm, with a speed of 1061 rpm. The flange is ISO 9409-1 - 63. Similar data is provided for other modules and configurations.

Recommendations:
Ensure correct angular orientation and preload adjustment to achieve a backlash-free system. Follow the detailed assembly instructions to maintain system integrity and performance.

Catalog excerpts

NEU! Spielfreies Stirnradsystem in gerad- & schrägverzahnter Ausführung NEW! Preloaded Double Pinion with Straight & Helical Teeth Unser neues Spielfreies Stirnradsystem ermöglicht den spielfreien Antrieb in Verbindung mit einer Zahnstange. Die Anbindung an ein Getriebe erfolgt über einen Flansch nach ISO 9409-1. Das Spielfreie Stirnradsystem ist sowohl als schrägverzahnte als auch geradverzahnte Variante erhältlich. Our new Preloaded Double Pinion enables a back-lash-free drive in connection with a rack. A ange acc. to ISO 9409-1 connects the Preloaded Double Pinion with a gearbox. The Preloaded Double Pinion is available as either helical or straight teeth type. Ausführungen | type: Material | material: einsatzgehärtet | case-hardened Verzahnung geschliffen | ground teeth geradeverzahnt oder schrägverzahnt linkssteigend straight teeth or helical, left hand, helix angle Eingriffswinkel | pressure angle Verzahnungsqualität | toothing quality

Open the catalog to page 1

NEU! Spielfreies Stirnradsystem NEW! Preloaded Double Pinion Material | material einsatzgehärtet | case-hardened Verzahnungsqualität | toothing quality straight teeth Geradverzahnt Modul module Schrägverzahnt Zähnez. No. teeth Modul module x = Prolverschiebung | addendum modication Belastungstabellen: Werte wurden unter folgenden Bedingungen ermittelt: Geschwindigkeit: 2,5 m/s; KA = 1,25; 20.000h; Fettschmierung Load tables: Values determined under following conditions: speed: 2,5 m/s; KA = 1,25; 20.000h; grease Geradverzahnt Modul module straight teeth Zähnez. No. teeth max. Drehmoment | max....

Open the catalog to page 2

NEU! Spielfreies Stirnradsystem NEW! Preloaded Double Pinion Montageanleitung für gerad- und schrägverzahnte Spielfreie Stirnradsysteme | assembly instruction for Preloaded Double Pinions with straight and helical teeth 1. Anbau an das Getriebe | assemble to the gearbox 2. Aufsetzen des Vorspannritzels | attach the preloaded pinion on the shaft 3. Anbringen des Druckstücks mit Hirth-Verzahnung | put on the pressure plate with Hirth-Coupling 4. Ermittlung der richtigen Position | choose the correct angular orientation Kleine Überlappung an der Flanke | little displacement on that side Kontakt...

Open the catalog to page 3

All WMH Srl catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list