Catalog excerpts
Kundenorientierte Losungen rAit \\ni.\g: Masterrader Master-GearsLieferprogramm: Modul 2 - 6 Product range: module 2 - 6 Die Masterrader haben gehartete und geschliffene Zahne. Die Nabe und die Bohrung werden entspre-chend dem Einsatz noch weiterbearbeitet. Dadurch erreichen wir kurzere Lieferzeiten und ein breiteres Spektrum an Anwendungsmoglichkeiten. The teeth of the master-gears are case-hardened and ground. The hub and the bore will be machined according to the operating range. Thereby the delivery time is shorter and the spectrum of applications will be enlarged. Beispiele | examples mit Innenspannsatz (siehe Kapitel K) with locking assemblies (see chapter K)
Open the catalog to page 1>v WMH Herion part of your drive Kundenorientierte Losungen r~*HF ANFHABIS 1 Masterrader, geschliffen, geradverzahnt Master-Gears, Ground, Straight Teeth Verzahnungsqualitat | toothing quality 6 e25 aufgekohlt und Zahne induktiv gehartet 60 HRC carburized and teeth induction hardened geradeverzahnt | straight teeth Eingriffswinkel | pressure angle 20° ** Please note: Bore diameters of the master-gear series are revised (previous diameter values in brackets). ** Bitte beaohten; Bohrungsdurchmesser der Masterrader-Serie werden uberarbeitet (bisherige Durchmesser-Werte in Klammern).
Open the catalog to page 2Customized Solutions >V WMH Herion part of your drive Masterrader, geschliffen, geradverzahnt Master-Gears, Ground, Straight Teeth Verzahnungsqualitat | toothing quality 6 e25 aufgekohlt und Zahne induktiv gehartet 60 HRC carburized and teeth induction hardened geradeverzahnt | straight teeth Eingriffswinkel | pressure angle 20°
Open the catalog to page 3>v WMH Herion part of your drive Kundenorientierte Losungen r~*HF ANFHABIS 1 Masterrader, geschliffen, schragverzahnt Master-Gears, Ground, Helical Teeth Verzahnungsqualitat | toothing quality 6 e25 aufgekohlt und Zahne induktiv gehartet 60 HRC carburized and teeth induction hardened schragverzahnt, linkssteigend | helical, left hand Schragungswinkel | helix angle 19° 31'42" Eingriffswinkel | pressure angle 20° ** Please note: Bore diameters of the master-gear series are revised (previous diameter values in brackets). ** Bitte beaohten; Bohrungsdurchmesser der Masterrader-Serie...
Open the catalog to page 4Customized Solutions >V WMH Herion part of your drive Masterrader, geschliffen, schragverzahnt Master-Gears, Ground, Helical Teeth Verzahnungsqualitat | toothing quality 6 e25 aufgekohlt und Zahne induktiv gehartet 60 HRC carburized and teeth induction hardened schragverzahnt, linkssteigend | helical, left hand Schragungswinkel | helix angle 19° 31'42" Eingriffswinkel | pressure angle 20° ** Bitte beaohten; ** Please note; Bohrungsdurchmesser der Masterrader-Serie werden uberarbeitet Bore diameters of the master-gear series are revised (bisherige Durchmesser-Werte in...
Open the catalog to page 5All WMH Herion Linner Gruppe catalogs and technical brochures
-
Linear Guideways
8 Pages
-
Quality Racks
2 Pages
-
Positioning Systems
6 Pages
-
Rack-and-Pinion Drive
2 Pages
-
Rack Guideways GUR Series
4 Pages
-
Linear Actuators
4 Pages
-
Flange Pinions
2 Pages
-
Support Units for Screws
9 Pages
-
Locking Assemblies & Bushes
20 Pages
-
Timimg Belts & Pulleys
6 Pages
-
Rack Guideways Z Series
6 Pages
-
Ball Screw
3 Pages
-
Preloaded Double Pinion
4 Pages
-
Bushes
1 Pages
-
Q5
2 Pages
-
PART OF YOUR DRIVE - WMH Herion
12 Pages
-
Transmissions 2014
468 Pages
-
Spur Gears 2014
60 Pages
-
Racks 2014
38 Pages
-
Rack & Pinion Drive 2014
36 Pages
-
Slewing Bearings 2014
14 Pages
-
Ball Screws 2014
30 Pages
-
Lead Screws & Threaded Nuts 2014
16 Pages
-
Bevel Gears 2014
13 Pages
-
Worm Gear Units 2014
12 Pages
-
Locking Assemblies & Bushes 2014
20 Pages
-
Couplings 2014
20 Pages
-
Sprockets 2014
54 Pages
-
Chains 2014
24 Pages
-
Belts & Pulleys 2014
6 Pages
-
Bevel Gear Units 2014
22 Pages
-
Screw Jacks 2014
30 Pages
-
Linear Drives 2014
24 Pages
-
Rack & Pinion Drive
40 Pages
Archived catalogs
-
Transmissions
406 Pages
-
Linear Drives 2010
308 Pages