Series FC 600/780/1000 Speedmaster Plus STEEL RULE CUTTING MACHINES

FC SPEEDMASTER plus The FC SPEEDMASTER plus is an automatic vacuum pressure forming machine with servo plugs and with steel rule cutting technology. High level of automation ensuring easy operation through a new and improved control system developed thanks to the continuous feedback of our customers. High performance, constant forming quality, very short re-tooling time, high-accuracy in cutting, high flexibility and ease of use are only a few of the advantages of the FC SPEEDMASTER plus series that contribute to the rationalization of the production costs. All thermoplastic materials like PP...

Investment means value: ü Constant quality, high performance and extreme flexibility ü MLS System (Machine Learning System) for initial self-setting of the cycle parameters ü Fast tool change to reduce machine downtime ü Cutting platen with minimal deflection to increase knife life and process stability ü Ceramic heating elements with individual temperature controllers for precise setting ü Display for energy consumption defining real Energy Savings ü Easy operating and maintenance ü Latest generation of software program and touch screen operating panel, fixed on a sliding arm and running along...

FC SPEEDMASTER plus model range FC E IM Vacuum and high pressure forming with steel rule cutting in the forming tool + in-line stacking FC E Vacuum and high pressure forming + steel rule cutting press + in-line stacking FC E IM2 Vacuum and high pressure forming with steel rule cutting in the forming tool + in-line additional cutting press + in-line stacking FC E HP Vacuum and high pressure forming + in-line hole punching press (punch and die) + steel rule cutting press + in-line stacking FC E IM2 HP Vacuum and high pressure forming with steel rule cutting in the forming tool + in-line hole punching...

FC SPEEDMASTER plus in detail Unwinding station with lifting device An asynchronous motor and inverter are used to unwind the sheet material in continuous mode in order to prevent sheet scratches. The unwinding speed is synchronized with the average speed of the machine avoiding material contamination. Two heating banks (top and bottom) assembled on a single frame are sliding on prismatic guides to eliminate vibrations. Top heater with Ceramic heating elements and individual temperature controllers for precise setting. Pyrometer for sheet temperature reading and temperature adjustment in closed...

Forming station Holes punching press (punch and die) Steel rule cutting press l Two movable platens (upper l Two movable platens (upper and l Two movable platens (upper and lower) are driven by three tie-bars lower) driven by four tie-bars l Cutting platens with minimal deflection to increase knife life and process stability l Automatic locking, steel rule cutting X-Y regulation and heated cutting plate on both platen. and lower) driven by three tie-bars for positive and negative pressure forming l Highly dynamic air valves adjusted independently are achieving a higher forming speed l Integrated...

FC SPEEDMASTER plus in detail Upward stacking system Downward stacking system l Low investment and high speed l Low investment and high speed l No stacking frame l Fast tool change to reduce machine downtime l Precise linear guides to prevent vibration l Ergonomic collecting with an integrated conveyor belt l A-B stacking l Precise linear guide to prevent vibration Upward stacking system + 2 or 3 axes Robot l High flexibility and speed l A-B-C stacking l No limitation on product design and mold lay-out l Solid frame to prevent vibration l Fast tool change to reduce machine downtime l Better process...

Servo driven plugs assist (3rd motion ) Automatic mold locking device and x-y steel rule cutting adjustment After fixing the clamping frame to the sheet, the plugs assist pushes the material into the cavities in order to guarantee an optimal material distribution on the sidewalls and to reach a better product stiffness using as less material as possible. l Faster tool change l Clean and safe adjustment Additional spreading point before the forming station. Helpful in order to limit sheet overlapping (wrinkling)

Lastest generation of drivers and control system Drivers and Control system The ü system is based on an extremely reliable and well tested B&R industrial PC and Drives ü Compact touch screen ü speed data exchange to optimize at the High best cycle times ü System (Machine Learning System) for MLS initial self-setting of the cycle parameters to optimize machine sequencing and increase machine output and product quality ü Program for mold change ü Forming and cutting force monitoring ü Energy recovery ü Ceramic heating elements with individual temperature controllers for precise setting ü Energy...

All thermoforming machines can be completed with the PH Preheaters series: l easy sheet passage and quick feeding l optimal hot air flow distribution l high efficiency and optimal temperature distribution l optimal insulation l improvement in thermoforming polypropylene Insulation thickness Output capacity Sheet thickness

WM Thermoforming Machines SA Via Dei Pioppi 3 . CH 6855 Stabio . Switzerland Tel (+41) 91 6407050 . Fax (+41) 91 6407059 [email protected] www.wm-thermoforming.com MILAN / MALPENSA AIRPORT