The range: Infrared light technology and quartz glass annealing tube Replacement quartz glass annealing tube (smart) Inoculation loop holder with inoculation loop Ø 3 mm Holding device for 3 WLD-TEC inoculation loop holders (smart) Instruction manual, 2-year warranty (except parts of wear and tear) Art.-No. 4.101.000 Art.-No. 4.102.000 Art.-No. 4.103.000 for 230 V mains voltage for 120 V mains voltage for 100 V mains voltage Tray, 3 places stainless steel, for right or left side Art.-No. 4.000.341 Art.-No. 4.001.000 Art.-No. 4.002.000 Art.-No. 4.003.000 for 230 V mains voltage for 120 V mains voltage for 100 V mains voltage Magnetic instrument support stainless steel Art.-No. 4.000.350 Quartz glass annealing tube Art.-No. 4.000.400 Technical Data start of sterilization sensor range (8-stages adjustable) ON / OFF, 2 user accounts sterilization timer 5 - 10 sec. inoculation loop cooling down timer 0 - 25 sec. with acoustic signal (disengageable) 15, 30 or 60 min. Sterimax basic Touch operation: Foot pedal* operation: Automatic unit switch off: start of sterilization (10 sec.) start of sterilization (10 sec.) 15 min. All models Status display: Thermocontrol: Sterilization at start-up: optical display of the sterilization progress dynamic sterilization timer sterilization of the annealing tube before usage Annealing tube Quartz glass: Inoculation loop holder stainless steel, with sleeve nut, for inoculation loops Ø 0.6 - 1 mm 230 V mains voltage: 220 - 240 V 50/60 Hz 2.6 A 120 V mains voltage: 112 - 128 V 50/60 Hz 5.1 A 100 V mains voltage: 95 - 105 V 50/60 Hz 6 A approx. 600 W / short time (5 - 10 sec.) IP 20 IR-Halogen lamp Mechanical Quartz glass annealing tube: Casing: Measurements (w x h x d): Weight: (1) Foot pedal stainless steel, cable length 3.0 m Art.-No. 6.000.402 outer-Ø 19 mm, inner-Ø 16 mm, length 112 mm heat resistant glass / stainless steel, UV and solvent resistant 110 x 170 x 180 mm approx. 1800 g Licences CE: EU guidelines: Protected Design * foot pedal optional length 245 mm Art.-No. 6.000.360 length 215 mm Art.-No. 6.000.365 Foot pedals only SteriMax basic indicates a hot annealing tube thermal circuit breaker Electrical Power supply: Power consumption: Protection class: Heat source: (2) Foot pedal radio set RF-Stick only available in EU countries Art.-No. 6.000.404-RF (3) Foot pedal Mini plastic, cable length 3.0 m Art.-No. 6.000.403 Safety features Residual heat display: Temperature monitor: Inoculation loops, wire Ø 0.6 mm Special stainless steel Ø 3 mm Art.-No. 6.000.373 Ø 5 mm Art.-No. 6.000.375 Platinum / Iridium Ø 1 mm Art.-No. 6.000.381 Ø 3 mm Art.-No. 6.000.383 Ø 5 mm Art.-No. 6.000.385 Email: [email protected] • Internet: http://www.wld-tec.com (03/18) Subject to technical changes. Sterilizing by IR-HotSpot GmbH Sterimax smart IR-Sensor: Touch operation: Automatic unit

The sterilization process starts with just a fingertip on the touch panel or by pushing the foot pedal*. A fixed timer (10 sec.) controls the annealing of your instruments automatically. Thermocontrol uses the residual heat and automatically shortens the energy supply for the next sterilization. Infrared loop sterilizer - using IR-HotSpot technology The course of the sterilization can be followed from start to end by looking upon the inoculation loop symbol. High-Speed annealing and sterilizing the smartest way Are you looking for a fast, efficient and flameless product to anneal or sterilize...

The sterilization process starts with just a fingertip on the touch panel or by pushing the foot pedal*. A fixed timer (10 sec.) controls the annealing of your instruments automatically. Thermocontrol uses the residual heat and automatically shortens the energy supply for the next sterilization. Infrared loop sterilizer - using IR-HotSpot technology The course of the sterilization can be followed from start to end by looking upon the inoculation loop symbol. High-Speed annealing and sterilizing the smartest way Are you looking for a fast, efficient and flameless product to anneal or sterilize...

The range: Infrared light technology and quartz glass annealing tube Replacement quartz glass annealing tube (smart) Inoculation loop holder with inoculation loop Ø 3 mm Holding device for 3 WLD-TEC inoculation loop holders (smart) Instruction manual, 2-year warranty (except parts of wear and tear) Art.-No. 4.101.000 Art.-No. 4.102.000 Art.-No. 4.103.000 for 230 V mains voltage for 120 V mains voltage for 100 V mains voltage Tray, 3 places stainless steel, for right or left side Art.-No. 4.000.341 Art.-No. 4.001.000 Art.-No. 4.002.000 Art.-No. 4.003.000 for 230 V mains voltage for 120 V mains...