*mydirectindustry

Catalogs
WIWA
WIWA Motar pump

WIWA Motar pump

Product catalog summary

Overview: The WIWA series 410.09 and 600.12 pumps are designed for the application of epoxy and water-based thick-film materials and mortars. These pumps are suitable for materials such as cement mortar, cement-bound fire protection materials, cement slurry, and filled vinyl esters. Unlike screw pumps, WIWA pumps can be flushed and cleaned with diluting agents, making them ideal for transferring epoxy-based materials.

Key Features:

Quick release couplings allow for easy disassembly, cleaning, and reassembly, reducing downtime.
Large capacity with extra-large flow passages and slow pumping speed to minimize wear.
Removable feed funnel for quick maintenance.

Fields of Application:

Decks on ships and ferries
Concrete and building sanitation
Sealing of basements
Fire protection

Basic Equipment:

Pump with carriage
Quick release couplings
25-liter funnel with cover

Accessory Kit:

10.5 m hose package in a protective hose
Spray pipe with air atomizer
8.5 mm nozzle (other sizes available on request)

Technical Data:

Specification	WIWA 410.09	WIWA 600.12
Order-No.	0653609	0652595
Pressure Ratio	9:1	12:1
Max. Fluid Pressure	72 bar (1044 psi)	96 bar (1392 psi)
Output per Cycle	410 cm³ (14 fl.oz)	600 cm³ (20 fl.oz)
Output at 60 Cycles	24.6 ltr. (6.5 gal.)	36 ltr. (9.59 gal.)
Air Motor Plate Diameter	140 mm (5.5 in.)	200 mm (8 in.)
Stroke Length	120 mm (4.7 in.)	120 mm (4.7 in.)
Max. Inbound Air Pressure	8 bar (116 psi)	8 bar (116 psi)
Min. Recommended Air Compressor Rating	3000 ltr./min (100 cfm)	3000 ltr./min (100 cfm)
Inbound Air Port (BSPP)	1/2"	1"
Inbound Fluid Fitting (BSPP)	2"	2"
Outbound Fluid Port (BSPP)	1"	1"

Additional Information: A pneumatic thick-film material agitator can be directly driven via the pump (Order-No.: 0652214). The complete system includes a spray pipe with an air atomizer.

Catalog excerpts

THICK-FILM / MORTAR PUMPS

Open the catalog to page 1

THICK-FILM / MORTAR PUMPS 410.09 / 600.12 The WIWA series 410.09 and 600.12 is perfectly suitable for the application of epoxy and water based thick-film materials and mortars, such as cement mortar, cement-bound fire protection materials, cement slurry and filled vinyl esters. In contrast to screw pumps, WIWA thick-film pumps can be flushed and cleaned with diluting agents. The pump is therefore also first choice when it comes to the transfer of epoxy based materials. Due to the use of quick release couplings the material pumps, which consist of only a few parts, can be quickly disassembled,...

Open the catalog to page 2

WIWA Motar pump

WIWA Motar pump

Catalog excerpts

All WIWA catalogs and technical brochures