Polymer Discharge Pump for polymer extraction

Product catalog summary

Introduction
The document introduces the new AT-Design for polymer pumps, highlighting advanced technology made in Germany. It focuses on the POLY-AT and BOOSTER-AT series, offering various sizes and capacities to meet different industrial needs.

Available Sizes and Capacities
The pumps are available in multiple sizes, each with specific throughput capacities ranging from 3,500 kg/h to 43,500 kg/h. This range allows for flexibility in application depending on the required output.

Design Versions

SX Version: Features integrated flange geometry for minimal installation space.
MX Version: Includes blind holes in the flange, offering the largest possible cross-section and minimal pressure loss, ideal for highly viscous polymers.
LX Version: Provides maximum flexibility with through-hole flanges and very low pressure loss.

Flexibility and Efficiency
The AT-Design offers exceptional flexibility for installations beneath polymer melting reactors. It allows for the selection of three different flange geometries to optimize technical and economic benefits. The redesign of core components like friction bearings, housings, and gears results in a more compact and efficient pump.

Comparison with Classic Design
The AT design offers several advantages over classic designs, including lower bearing temperatures, optimized inlet geometry, and a larger viscosity range. It also simplifies handling and spare part management, increases throughput by up to 40%, and reduces shear and heat input.

Advantages of AT Pumps
AT pumps provide higher throughput without changing installation size, thanks to optimized gears and housing geometry. They offer increased throughput, reduced installation space, higher differential pressure, reduced NPSH value, and improved volumetric efficiency.

Technical Specifications
The pumps are available in pressure levels of 200, 250, and 320 bar, with housing versions SX, MX, and LX. They are compatible with EN 1092-1 or ANSI B16.5 product connections and can handle various media, including PP, PET, ABS, PA, EPS, and PC.

Contact Information
Witte Pumps & Technology GmbH provides contact details for further inquiries, emphasizing their commitment to customer success with the new pump design.

Catalog excerpts

Polymer Discharge Pump for polymer extraction-1

The new design for polymer pumps Advanced technology

Open the catalog to page 1

Polymer Discharge Pump for polymer extraction-2

More efficiency Available sizes for POLY-AT and BOOSTER-AT series 611-100-100 Classic design All core components have been redesigned: friction bearings, housings and gears have all been modified. The result: a more compact pump with improved efficiency. overhauled our entire range of polymer pumps. higher throughput and lower reject rates, we have completely increasing. So to live up to the demand for greater efficiency, The demands on plants, processes and equipment are constantly Features PRESSURE LEVELS AT pumps offer customers multiple advantages over conventional pumps. For example, AT...

Open the catalog to page 2

Polymer Discharge Pump for polymer extraction-3

The new matrix for your success! WITTE PUMPS & TECHNOLOGY GmbH L ise-Meitner-Allee 20 25436 Tornesch / Hamburg / Germany +49 (0)4120 706 590 +49 (0)4120 7065 949 [email protected] www.witte-pumps.com

Open the catalog to page 3