• Control Equipment: Zeta 02 pump controller with a cut-in pressure of 1.5 bar, pressure gauge, operating state indicator, and electric socket. Includes an open mains water outlet compliant with DIN EN 1717.
• Wall Bracket: Compact, made of stainless steel, dimensions W 310 x H 310 x D 150 mm.
• Pressure Pump: Multigo submersible pressure pump with a stainless-steel floating coarse suction filter (mesh size 1.2 mm) and a preassembled float switch.

• No pump noise indoors.
• High-performance submersible pressure pump for direct water supply to appliances.
• Automatic mains water top-up into the storage tank, compliant with DIN 1717.
• Low power consumption in standby mode (less than 0.2 watts).

The system operates as a rainwater harvesting unit with a Multimat control unit, concrete storage tank, and vortex fine filter. The wall bracket with the controller is installed indoors, and the Multigo submersible pressure pump is installed in the storage tank.

• Hose connection set for Multimat.
• Two surface-mounted water meters.
• Flexible tube DN 50, 25 m roll.
• Connecting piece from flexible tube to tundish.
• Pressure hose 1", up to 12 bar.
• Wall bushing WD 110/2 with six bores.
• Hose connection fitting 1" nozzle.

• Multimat with Multigo 205 submersible pressure pump (max. delivery rate 80 l/min, max. delivery head 48 m).
• Multimat with Multigo 407 submersible pressure pump (max. delivery rate 125 l/min, max. delivery head 49 m).

• Indoor wall bracket with Zeta 02 pump controller, open mains water outlet, stainless-steel wall bracket, and labelling set.
• Submersible pump in rainwater storage tank with Multigo multi-stage submersible pressure pump, 20 m connecting cable, float switch, and stainless-steel floating suction filter.