Efficient Production of Dentures Dental Milling System GAMMA 202 5D

Production of Dentures - quickly and accurately Equipped for daily requirements Dry Processing / Wet Processing Fast automatic change-over Tool Changer 7 or 14 positions with sister tool function Spindle 2000 Watt or 3000 Watt Temperated cooling Drive highly dynamic AC servo motors / linear motors 5 axes simultaneously with active stabilization The high-tech milling machines of the Gamma Dental series have open interfaces that can be flexibly combined with CAD-CAM components from any manufacturer. All your Dental milling needs will be met: inlays, onlays, crowns and bridges, part and full anatomically...

The 5 axes operation of the Gamma 202 5D ensures a highly dynamic, fast and precise milling operation. The drive concept offers the possibility of the 5-axis to operate simultaneously. Alternatively, it can fix rotation axes and only tilt the active axes. As a result, optimal cutting speeds, high performance and precise results are ensured through the superb stiffness of the entire system. For each material, the right strategy. Different materials require different approaches for processing. There are three common methods: No need to cool the material or milling bit. A clean cut will be delivered...

■ Main axes drive with highly dynamic AC servo motors ■ Touch screen for easy operation Machine Data Number of axes Working Angle Type of spindle Maximum spindle speed Tool changer Tool length sensor Touchscreen as User Interface Control software Interfaces for CAM software Installation Requirements Dimensions: width x height x depth Energy connection Optional Features Tool changer Automatic Loader Cooling System Minimal Lubrication System Dust extraction through patented Tornado system A- axis ± 25 ° swivel simultaneously B-axis ± 180 ° swivel simultaneously High-frequency spindle, equipped...

GAMMA 202 5D - PERFORMANCE The high-performance machine for the highest standards in the range of microns. ▄ Equipped with Linear Scales ▄ Controlled cooling temperature ▄ Main axes driven by Linear Motors Machine Data Number of axes Working Angle Type of spindle Maximum spindle speed Main axes drive Position measurement Tool changer Tool length sensor Temperature stabilization User Interface Control software Interfaces for CAM software Description Simultaneous 5-axes A axis ± 25 ° swivel simultaneously B-axis ± 180 ° swivel simultaneously High-frequency spindle, up to 6kW 50.000 rev/min Linear...

W. Loader - The automation system Equipped for the future To increase productivity, Wissner offers an automatic loader to maximize your effective milling time. Similar to a Juke-Box, the loader automatically supplies up to 30 blanks of different materials. The loader can be an add-on to the GAMMA 202 5D at any point in time: as soon as your operation requires it. The machine software controls and monitors the complete system, including the blank management.

30 positions for efficient processing and for allowing independent, supervised-free work, i.e. over weekends. 1. For an efficient milling process, various thicknesses of the same material are used. For example, for five different thicknesses of two materials, you would need 10 blank positions. As a further benefit, the wear on your milling bits and the cost of raw material will be minimized. 2. Intra-oral scanners are advancing. The production of a dental prosthesis requires an associated gypsum model. Considering 30 units per blank you would need 30 gypsum blanks. If the W. Loader is equipped...

Everything for a seamless operation from one source! Scanning of the model and modeling in CAD Swift processing and conversion of the CAD data to the milling program using the CAM software Selection of the material and milling tools Milling with the GAMMA Dental Perfectly fitting, highly precise dentures

Dry Processing Cooling of the material or milling bit is not required. Any milling dust will be immediately removed through the patented, integrated extraction system. Wet Processing The integrated cooling system protects the milling bits. Chips are flushed away from the cavities instantly and the milling area is kept clean. Thus, you significantly extend the life-time of your milling bits. Through the flow of the coolant, the machine is kept completely free of chips. The chips will be removed from the coolant in the integrated filter unit and the coolant will be re-circulated to the machine....

High-precision manufacturing in minutes Conjure up your own abutment! With our high-tech machines and the use of the CAD-CAM technology, an economical and efficient production of abutments is feasible: ■ Add-on to exisiting machines ■ Saving time, reducing cost and gaining precision through independent production ■ Possible automation in combination with the 3-D Sensor ■ Short processing times ■ Available for majority of implant systems Get results quickly: By using a combination of the specialized CAM software, coupled with predefined Wissner templates, you will find yourself milling your own...

Service Regardless of whether by phone, remote maintenance through Internet or directly on-site... WISSNER Gesellschaft für Maschinenbau mbH August-Spindler-Straße 14 37079 Göttingen Germany phone + 49 551 50508 - 0 fax + 49 551 50508 - 90 E-Mail: [email protected] Internet: www.wissner-dental.com