PACKAGE X-RAYTUBE wisman High voltage power supply iiJl ISO9001 :2008 Page1of2f-N MAXANODE CURRENT:1.0mA MAXANODE VOLTAGE:50kV MAX FILAMENT CURRENT:2.0A NOMINAL FILAMENT VOLTAGE;2.0V MAX PACKAGE TEMPERATURE: 55°C ^_> INTRODUCTION WSM50501 Series X-Ray tube is a multi-use, side-window X-Ray tube. The tube is packaged in a metallic casing lined with lead. The package is filled with special designed insulation oil for high-voltage insulation and heat dissipation. Thetubeistobe operated in a positive anode mode with the cathode grounded.Thisseriesisinuseformany industrial applications. TYPICAL APPLICATIONS RoHS inspection, X-Ray fluorescence analysis, X-Raythickness gauging, density analysis, X-Ray imaging, real-time process control, and etc. SPECIFICATIONS ' www.wismanhv.com [email protected] ) 2016.1 wisman high voltage power supply corporation All Rights Reserved

OUTLINE DRAWING OPERATION MANUAL lHow to start the X-ray tube under normal use? : In order to ensure the longevity of the X-ray tube, please follow the steps below to obtain the required anode voltage and tube current: Turn on the tube voltage to 50% of the required tube voltage, (if the required tube voltage is lower than 20kV, it can be directly turned on for use. ) Start the tube current to 50% of the desired tube current (wait 10 seconds)increase the tube voltage to the desired tube voltage, and increase the tube current to the desired tube current. lHow to mature an X-ray tube that has not...