ACCESSORY INTRODUCTION f A OPERATING HIGH VOLTAGE POWER SUPPLYAT COMPUTER COMMUNICATIONS INTERFACE: USB2.0, RS-232, RS-422 COMMUNICATIONS PROTOCOL OUTWARD OEM CUSTOMIZATIONAVAILABLE V__✓ Wisman's PowerCon Series of high voltage power supplies of control system are dedicated at high voltage power supply. PowerCon included 3 types of communications interface:USB2.0, RS-232, RS-422 , oem customization available. The system of communications protocol outward, operating high voltage power supply at computer. PowerCon INTERFACE: PowerCon Cabling: RS-232 INTERFACE: 11 5K bits per second No Parity 8 Data Bits 1 Stop Bit No Handshaking DB9 Connector(as shown) USB INTERFACE: Compliant USB1.1 andUSB2.0 Type B male connector Included driver RS-422 INTERFACE: 11 5K bits per second No Parity 8 Data Bits 1 Stop Bit No Handshaking DB9 Connector(as shown) RS-232 CABLING: A standard RS-232 cable where lines 2 and 3 are reversed is use to connect the PowerCon serial portto the serial port on a standard personal computer. USB CABLING: Ahigh-quality double-shielded USB2.0 Type A or B (hostto slave) cable should be used in all applications. This type of cable is a standard PC to peripheral cable that utilizes full size connectors. RS-422 CABLING: Astandard RS-422 cable where lines 4 are reversed is use to connect the PowerCon serial portto the serial port on a standard personal computer. PowerCon software interface: E-maN:[email protected] www.wismanhv.com © 2016.1 wisman high voltage power supply corporation All Rights Reserved