*mydirectindustry

MT Series

Product catalog summary

Introduction
Wisman’s MT Series modular high voltage power supplies provide positive or negative output voltages ranging from 0.3kV to 30kV. These power supplies feature local and remote programming, voltage and current monitoring, and protection against overload, arc, and short circuits. They are suitable for various applications including mass spectrometry, medical, and industrial uses.

Specifications
The MT Series offers output voltages from 0.3kV to 30kV with power ranging from 5W to 60W. The units can be controlled via an external potentiometer or voltage for output control. The power supplies are designed to operate within a temperature range of -20°C to 60°C and have a storage temperature range of 0°C to 60°C. They maintain high stability with a voltage load regulation of 0.01% and a line regulation of ±0.01% for a 10% change in input voltage.

Typical Applications
The MT Series is used in a wide range of applications such as mass spectrometry, photomultiplier tubes, ultrasonic transducers, electron beam and ion beam applications, electrostatic discharge testing, and more.

MT Selection Table
The document includes a detailed selection table listing various models with their corresponding maximum output voltage, power, and ripple specifications. Models are available with different input voltages and configurations to suit specific application needs.

Operation Notes
Users are advised not to touch the high voltage output cable immediately after turning off the power supply due to potential residual voltage. Proper grounding of the GND terminal pin is recommended for safety. Continuous short circuits should be avoided.

Dimensions and Connections
The document provides detailed dimensions for different models and outlines the input connection diagram. It specifies the use of an 8-pin connector and provides guidelines for wiring and grounding.

Conclusion
The MT Series by Wisman is a versatile and reliable choice for high voltage power supply needs across various scientific, medical, and industrial applications. Its customizable options and robust safety features make it suitable for a wide range of uses.

Catalog excerpts

wisman High voltage power supply MiHMiRiii fcJB 0.3kV~30kV 5W-60W HIGH VOLTAGE MODULE OUTPUTVOLTAGES FROM 0.3kVTO 30kV, POWER FROM 5WTO 60W LOW NOISE,HIGHSTABILITYSIX-SIDEDSHIELDED BOTH EXTERNALPOTENTIOMETER&VOLTAGE FOROUTPUTCONTROL SMALL SIZE,HIGH POWER DENSITY ARC &CONTIUOUS SHORT CIRCUITPROTECTION LOCALANDREMOTE CONTROL OEM CUSTOMIZATIONAVAILABLE Wisman's MT Series modular high voltage power supplies offer positive or negative output voltages from 0.3kV to 30kV.High voltage can be linearly ramped up.TheMT incorporates local and remote programming,voltageandcurrent monitoring,over load,arc and short circuit protection. TYPICALAPPLICATIONS Mass spectrometry,PhotomultiplierTubes(PMT),Piezo crystal devices,Electrostatic discharge Testing ESD,Ultrasonic transducers,ElectronmultiplierDetectors Electrophoresis,DNAsequencing,Electron Beamand Ion Beam,Electrostaticchuck, High voltage bias,HipotTesting,Cable Testing,Provides powerto the pulsepowe,Electrospinning,Capacitor Charging, Semiconductor Testing,Electronic component aging,Gas Chromatography,BloodAnalysis,Cathode X-Ray,Medical, ChemicalApplications,Science, LaboratoryApplications,IndustrialApplications. MT SELECTION TABLE ) 2019.2 Wisman High Voltage Power Supply Corp. All Rights Reserved 020219

Open the catalog to page 1

SPECIFICATIONS DESCRIBE PARAMETER Input Voltage See“MT INPUT VOLTAGE / CURRENT TABLE ”. Output Voltage 0.01% per 8 hours after 1/2 hour warm-up. Temperature Coefficient See“MT SELECTION TABLE”. Reference Voltage Output Voltage Accuracy Voltage/Current Monitor 0~+5Vdc/ 0 to rated output for both voltage /current, Zout=1k W , Accuracy: ±1% . By internal potentiometer 25kW Local programming By external potentiometer 20k W or external control voltage(Vcon-in= 0 to +5Vdc, Remote programing Voltage Load Regulation 0.01% of output voltage no load to full load. Voltage Line Regulation ±0.01% for ±10%...

Open the catalog to page 2

Typical value at rated load Tr: Risetime Tf: Falltime High Voltage Power Supply 777" Tr, Tfshall be slowwith capacitive load. Adummy resistor R shall work for quick fall time. MTINPUTVOLTAGE/CURRENTTABLE LR DIMENSIONS TABLE MODEL INPUT VOLTAGE Output Volltage MODULES Output Volltage ) 2019.2 Wismag Hicjh Voltepe ^^wer ^ppty Cp^. Ag Rights Reserved 020219

Open the catalog to page 3

MT Series

MT Series

Catalog excerpts

All Wisman High Voltage Power Supply catalogs and technical brochures