wisman High voltage power supply MSS iiJl %iJS 0.3kV~3kV,1W~5W ULTRA LOW RIPPLE HIGH VOLTAGE POWER SUPPLY|S09001-2015Page 1 of 2 HIGH S TABILITY: 10PPM/HR ULTRA LOW NOISE 10PPM ULTRA LOW TEMPERATURE COEFFICIENT 10PPMfC SIX-SIDED SHIELDED EXTERNAL POTENTIOMETER OR AN EXTERNAL VOLTAGE REFERENCE CUSTOMIZATION AVAILABLE V___J INTRODUCTION Wisman's MDA series of high voltage 1~5W micro-modules that provide output voltages ranging from 0.3kV to 30kV. MDA modules are compact six-sided shielded modules with ultra-low noise, high stability and ultra-low temperature coefficient. All models are provided with external potentiometer or an external voltage monitoring panel. This series modules have protection functions including over current protection, arc fault protection and short circuit protection. TYPICAL APPLICATIONS Mass spectrometry photomultiplier tubes (PMT), solid state detectors, Piezo crystal devices, ultrasonic transducers, microchannel plates (MCP), spectroscopy, scintillation counters, electron multiplier detectors, nuclear Instruments, electrophoresis, semiconductor testing, DNA sequencing, radiation counter, electron and ion beams, electrostatic chuck, high voltage, bias hipot testing, precision lenses, image intensifiers, semiconductor testing, chemical applications, laboratory applications, industrial application supplies. © 2019.2 wisman high voltage power supply corporation All Rights Reserved 020219

MICRO-MODULES ^^PARAMETER -®° Imon BOTTOM VIEW -® • Vmon © < CHARACTERISTICS OF OUTPUT VOLTAGE SETTING 1. PIN ©, © and case are internally connected,andshould be always grounded. 2. External potentiometer of T.C a 100ppm/'C,PC &1/4W is recommended. 3. ©, ®, are for option.