video corpo

Cold milling machine W 50
24Pages

{{requestButtons}}

Catalog excerpts

Cold milling machine W 50 - 1

Efficient small milling machine for standard applications Cold milling machine W 50

Open the catalog to page 1
Cold milling machine W 50 - 2

The economically efficient alternative for countless small milling jobs Efficiency is the W 50’s hallmark The W 50 is the perfect intermediate-size machine between the tried-and-tested small milling machine models W 35 DC and W 50 DC, and fully meets the requirements of standard users. Whether milling on small to mediumsized roads, carrying out small repairs or milling tie-ins, milling around manhole covers or removing asphalt strips: The W 50 performs all the jobs that are typical of a small milling machine with tremendous economic efficiency. Ease of operation, low fuel consumption and...

Open the catalog to page 2
Cold milling machine W 50 - 3

The W 50 is distinctive for its tried-and-tested equipment features and extremely easy handling Compact, dependable and economically efficient In accordance with the customer’s specification: machine without loading conveyor The W 50’s intuitive control interface and ergonomically optimized operator’s platform considerably increase comfort for the machine operator. Additional options, such as different conveyor choices, canopy, three-wheel or four-wheel design, or FCS extend the range of applications and ease of operation. Highly precise milling results of top quality can be achieved with...

Open the catalog to page 3
Cold milling machine W 50 - 4

Large surfaces are no problem for small machines A class of its own in practical operation The W 50 impresses not only when swiftly removing surface courses at depths of up to 4 cm. It cuts a fine figure also when milling off several layers or even entire asphalt packages at depths of up to 16 cm. The performance diagram is proof that the small milling machine is capable of achieving high daily production rates. The schematic diagram on the opposite page can be used for a rough calculation of the practical milling performance to be expected. An allowance factor takes account of influencing...

Open the catalog to page 4
Cold milling machine W 50 - 5

Economically efficient milling of surfaces Milling depth (cm) 16 14 Hard asphalt 12 Soft asphalt 10 8 Most frequent operating area 6 4 2 500 Theoretical area performance (m2 / h) 350 Practical area performance (m2 / h) 250 Practical area performance (m2 / h) 150 Practical area performance (m2 / h) 0 0 50 100 150 200 250 300 350 400 450 Free motorway section (allowance factor: 0.7) 0 50 100 150 200 250 300 Country road with road fixtures (allowance factor: 0.5) 0 50 100 150 200 An allowance factor of 0.3 is used where space is limited Heavily trafficked inner-city road (allowance factor:...

Open the catalog to page 5
Cold milling machine W 50 - 6

Mature engineering guarantees high daily production rates Reliable high-tech works the ground Wirtgen has been the leader in cutting technology for many years, guaranteeing high-quality milling results. An optimized arrangement of the toolholders on the milling drum and clever tooling of the drum edges ensure a clean milling texture and quiet operation of the machine. The milling drum is fitted with welded toolholders and works against the direction of travel in an effectively sealed milling chamber. Clean loading of the milled material is ensured by the hydraulically height-adjustable...

Open the catalog to page 6
Cold milling machine W 50 - 7

Perfect milling _ Cutting tools per m3 at high wear and tear _ Cutting tools per m3 at low wear and tear Cutting tools per m3 at medium wear and tear Cutting tool wear as a function of the milling depth and the properties of the Low cutting tool wear cuts operating costs locked when in raised position to allow convenient replacement of cutting tools When in floating position, the scraper blade permits full loading of the milled material ^ The scraper blade can be opened hydraulically to provide the machine operator with ample room for the replacement of cutting tools. To ensure the safety...

Open the catalog to page 7
Cold milling machine W 50 - 8

Making child’s play of work on the job site FCS fine milling drum Milling width: Milling depth: Tool spacing: 500 mm 0 – 50 mm 6 mm FCS micro fine milling drum Milling width: 300 + 2 x 25 mm Milling depth: 0 – 30 mm Tool spacing: 3 mm FCS micro fine milling drum Milling width: 500 mm Milling depth: 0 – 30 mm Tool spacing: 3 mm FCS makes the W 50 an all-rounder on the job site The small milling machine W 50 is fully equipped for meeting the daily challenges on the job site. A mechanically driven milling drum guarantees maximum efficiency and top performance. The power belts of the milling...

Open the catalog to page 8
Cold milling machine W 50 - 9

The milling drum is easily pulled off the shaft after unscrewing Raise the side plates when travelling over obstacles, or press down on the ground as side plates reliably seal ^ The machine's electrically operated water spray system reduces cutting tool wear and tear, as well as the development of dust during the milling operation. ^ The nozzles of the water spray system can be removed and cleaned in no time at all. ^ The side plates on both sides of the milling drum can be raised, preventing them from digging into unpaved ^ Special milling drums for different applications are available...

Open the catalog to page 9
Cold milling machine W 50 - 10

Fast and flexible loading of material The loading conveyor can be adjusted in height … … and slewed by 25° to the left and 20° to the right, permitting loading to be effected to the side Economically efficient material loading is most important Reliable loading of the milled material is of crucial importance when it comes to ensuring the smooth completion of a milling site. That’s where our W 50 makes a strong showing. Customers can choose from as many as four different loading conveyor options. Whether the milled material is loaded on trucks or into the bucket of a wheel loader, deposited...

Open the catalog to page 10
Cold milling machine W 50 - 11

The W 50’s optional folding conveyor facilitates transport Always on the safe side with four loading options The short conveyor permits loading into the bucket of a wheel loader or onto a mini dumper The W 50 leaves the milled material in the cut when working without loading conveyor The W 50 is available with the following conveyor options: without conveyor, with one-stage short conveyor, one-stage long conveyor, or long folding conveyor. A special coupling device enables the loading conveyor to be attached or removed in a few swift moves by one person only. The optionally available...

Open the catalog to page 11

All Wirtgen catalogs and technical brochures

  1. SP 64 / SP 64i

    24 Pages

  2. 4200 SM

    40 Pages

  3. Foamed bitumen

    28 Pages

  4. S-Pack

    8 Pages

  5. Cold milling

    32 Pages